JIS B 0202

Parallel pipe threads

English 1999
0.000
JIS
Detailed Information

This standard specifies parallel pipe threads and is applicable to the threads used mainly for mechanical connection to joint the pipes, pipe fittings, fluid machinery, etc.

The parallel internal pipe thread of Class B of PF 1/8 to PF 6 in thread designation and the parallel thread of PF 7 to PF 12 in thread designation shall be as specified in Appendix (normative).

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 918 Supplement 3
1999
English

Overview of European Standards for fasteners

This Supplement provides information relating to DIN 918 but no additional standard specifications.
ISO
ISO 7040
2012
English

Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10

This International Standard specifies the characteristics of prevailing torque type hexagon regular nuts (with non-metallic insert), with threads from M3 up to and including M36, in product […]
NASM
NASM 21266
1999
English

GROMMET, PLASTIC, EDGING

MATERIAL: NYLON PER SPECIFICATION ASTM D4066, TYPE 1. POLYTETRAFLUOROETHYLENE (TFE) PER SPECIFICATION ASTM D1457. POLYFLUOROETHYLENEPROPYLENE (FEP) PER SPECIFICATION ASTM D2116.
DIN
DIN 7992
1970
English

T-head Bolts with Large Head

Technical conditions of delivery according to DIN 267
ISO
ISO 4161
1983
English

Hexagon nuts with flange – Product grade A

This International Standard specifies the characteristics of hexagon nuts with flange with thread sizes from M 5 to M 20 inclusive, in Product grade A.
DIN
DIN 434
1990
English

Square taper washers for use with channel sections

Washers as specified in this standard are intended for use in structural bolting of channel sections using bolts up to property class 5.6.
DIN
DIN 432
1983
English

External tab washers (Locking tab washers)

This standard specifies requirements for external tab washers (previously known as locking tab washers), which are used in threaded fastenings. They are intended to prevent the fastening lo […]
DIN
DIN 267-1
1982
English

Fasteners – Technical delivery conditions – General requirements

This standard applies to standardized fasteners (mainly bolts, screws, nuts and similar threaded and formed parts) as finished components in the condition on delivery, in so far as no speci […]
DIN
DIN 7984
1985
English

Hexagon socket thin head cap screws

This standard specifies product grade A hexagon socket thin head cap screws with ISO metric screw thread from size M3 up to and including size M 24. If, in special cases, the screws are to […]