JIS B 0203

Taper pipe threads

English 1999
0.000
JIS
Detailed Information

This Standard specifies taper pipe threads and is applicable to the threads used mainly for pressure-tight joints on the threads for jointing the pipes, pipe fittings, fluid machinery, etc.

The taper pipe thread of PT 3-1/ 2 and PT 7 to PT 12 in thread designation and the parallel pipe thread of PS 3-1/ 2 and PS 7 to PS 12 shall be as specified in Annex (normative).

Download File
(Log in to download spec.)

Check out other specifications

ASTM
Abstract of ASTM F1470
1998
English

STANDARD GUIDE FOR FASTENER SAMPLING FOR SPECIFIED MECHANICAL PROPERTIES AND PERFORMANCE INSPECTION

1.1 This guide provides sampling methods for determining how many fasteners to include in a random sample in order to determine the acceptability of a given lot of fasteners. 1.2 This guide […]
DIN
DIN 924
1986
English

Slotted raised countersunk head screws with full dog point

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in […]
DIN
DIN 564
1995
English

Hexagon set screws with small hexagon, half dog point and flat cone point

This standard specifies dimensions and technical delivery conditions for coarse and fine pitch thread M6 to M36 hexagon set screws with small hexagon, half dog point and flat cone point, as […]
DIN
DIN 7513
1995
English

Hexagon head and slotted head thread cutting screws – Dimensions, requirements and testing

This standard specifies dimensions. requirements and test methods for heat-treated hexagon head and slotted head thread cutting screws with an ISO metric thread as specified in DIN 13-12, w […]
DIN
DIN 188
1987
English

T-head bolts with double nib

This standard specifies M 8 to M 80 X 6 T-·head bolts with double nib. They are designed for use in attaching components to foundations or similar structures by means of T-slots, such as ar […]
DIN EN
DIN EN 28742
1992
English

Third-length centre grooved pins (ISO 8742 : 1986) English version of DIN EN 28 742

This International Standard specifies the characteristics of third-length centre grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, wit […]
ASTM
Abstract of ASTM A325M
1993
English

HIGH-STRENGTH BOLTS FOR STRUCTURAL STEEL JOINTS [METRIC]

1.1 This specification covers requirements of various types of quenched and tempered steel bolts in nominal thread diameters M16 to M36 inclusive, commonly known as "high-strength structura […]
DIN EN
DIN EN 28736
1992
English

Unhardened taper pins with internal thread (ISO 8736 : 1986) English version of DIN EN 28 736

This International Standard specifies the characteristics of unhardened taper pins with internal thread, and metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.
JIS
JIS B 1122
1996
English

Cross recessed head tapping screws

This Japanese Industrial Standard specifies the steel cross recessed head tapping screws (hereafter, referred to as “steel tapping screws”) for general use.