JIS B 0209-5

ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing

English 2001
0.000
JIS
Detailed Information

This Standard specifies deviations and limits of sizes for pitch and crest diameters for ISO general purpose metric internal screw threads conforming to JIS B 0205-3 having basic profile according to JIS B 0205-1.

Internal screw threads according to this Standard are intended to mate with external screw threads with maximum size of tolerance position h before hot-dip galvanizing.

The limits of sizes for the tolerance quality specified are derived from tolerances specified in JIS B 0209-1.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
ASTM A449
1993
English

Standard Specification for Quenched and Tempered Steel Bolts and Studs

1.1 This specification covers the chemical and mechanical requirements for two types of quenched and tempered steel bolts and studs for general applications where high strength is required. […]
ASTM
ASTM A513/A513M
2012
English

Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

1.1 This specification covers electric-resistance-welded carbon and alloy steel tubing for use as mechanical tubing. 1.2 This specification covers mechanical tubing made from hot- or cold-r […]
JIS
JIS B 1055
1995
English

Tapping screws—Mechanical properties

This Japanese Industrial Standard specifies the characteristics of heat-treated steel tapping screws, with tapping screw thread from ST2.2 to ST8 inclusive in accordance with ISO 1478, toge […]
DIN
DIN 6924
1987
English

Prevailing torque type hexagon nuts with nonmetallic insert

This standard specifies requirements for M3 to M48 prevailing torque type hexagon nuts with nonmetallic insert, assigned to product grade A (for sizes up to M16) and product grade B (for si […]
DIN EN
DIN EN 1666
1998
English

Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread (ISO 12125: 1997, modified) English version of DIN EN 1666

This European Standard specifies the characteristics of prevailing torque type hexagon nuts with flange, with non-metallic annular insert and metric fine pitch thread with nominal thread di […]
ASTM
Abstract of ASTM F1137
1993
English

PHOSPHATE/OIL AND PHOSPHATE/ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS

1.1 This specification covers the basic requirements for three grades of corrosion protective coatings for fasteners. Grade I consists of a zinc phosphate coating with a supplemental protec […]
DIN
DIN 434
1990
English

Square taper washers for use with channel sections

Washers as specified in this standard are intended for use in structural bolting of channel sections using bolts up to property class 5.6.
DIN
DIN 6792
1993
English

Semitubular countersunk head rivets with nominal diameters from 1,6 to 10 mm

This standard specifies dimensions of steel and nonferrous metal semitubular countersunk head rivets with nominal diameters from 1,6 to 10 mm.
ASTM
Abstract of ASTM F467M
1993
English

NONFERROUS NUTS FOR GENERAL USE

1.1 This specification covers the requirements for commercial wrought nonferrous nuts in nominal thread diameters M6 to M36 inclusive in a number of alloys in common use and intended for ge […]