JIS B 1010

Designation system for fasteners

English 2003
0.000
JIS
Detailed Information

This Standard specifies a system for the designation of fasteners in product standards.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 1479
1998
English

Hexagon turnbuckles

This standard specifies dimensions and technical delivery conditions for sizes M6 to M30 hexagon turnbuckles with widths across flats as in ISO 272, of product grade A and made of steel or aust [...]
ASTM
ASTM A489
1993
English

Standard Specification for Carbon Steel Lifting Eyes

1.1 This specification covers weldless forged, quenched, and tempered carbon steel threaded lifting eyes (fomerly eyebolts) for overhead lifting. 1.2 The specification includes two types denoti [...]
DIN EN
DIN EN 28765
1992
English

Hexagon head bolts with metric fine pitch thread – Product grades A and B (ISO 8765 : 1988) English version of DIN EN 28 765

This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread diame [...]
ISO
ISO 7379
1983
English

Hexagon socket head shoulder screws

This International Standard lays down the specification for hexagon socket head shoulder screws with metric dimensions and nominal shoulder diameters from 6,5 to 25 mm inclusive.
ASME
ASME B18.10
2006
English

TRACK BOLTS AND NUTS

This Standard covers the complete general and dimensional data for inch series oval neck and elliptic neck track bolts and square nuts intended for use with these bolts, and recognized as an Am [...]
DIN EN
DIN EN 14399-6
2006
English

High-strength structural bolting assemblies for preloading – Part 6: Plain chamfered washers (includes Corrigendum AC:2006) English version of DIN EN 14399-6:2006-06

This document specifies, together with EN 14399-1, hardened and tempered plain washers with chamfer intended for assembly with large series hexagon high-strength structural bolts and nuts with [...]
DIN
DIN 94
1983
English

Split pins

In its October 1972 edition, DIN 94 was aligned with International Recommendation ISO/R 1234 - 1971. This Recommendation was converted into an International Standard in 1976, without any techni [...]
DIN
DIN 661
1993
English

Countersunk head rivets with nominal diameters from 1 to 8 mm

This standard specifies dimensions of steel and nonferrous metal countersunk head rivets with nominal diameters from 1 to 8 mm.
DIN
DIN 125-2
1990
English

Product grade A washers with a hardness from 300 HV designed for use with hexagon head bolts and nuts

This standard specifies requirements for product grade A washers with a hardness of 300 HV or more. The preferred application of these washers is in product grades A and B hexagon head bolt/hex [...]