JIS B 1012
Cross recesses for screws
English
1986
0.000
Detailed Information
This Japanese Industrial Standard specifies the shape, dimensions and measuring method for cross recesses formed on the heads of machine screws, wood screws, tapping screws and the like, hereinafter referred to as the “cross recess”.
Download File
(Log in to download spec.)
Check out other specifications
1976
English
Securing Parts for Rolling Bearings – Snap Rings for Bearings with Ring Groove
For connection with DIN 616 and ISO 464, see Explanations. This Standard specifies the dimensions of snap rings required for securing bearing with ring groove according to DIN 616, diameter series 0, 2, 3 and 4.
1997
English
Hexagon socket set screws
Introduction This Japanese Industrial Standard has been prepared based on ISO 4026, ISO 4027, ISO 4028 and ISO 4029 published in 1993 as the 2nd edition, without alteration in the technical contents with respect to the corresponding parts (quality, shape and dimensions). However, items wh […]
1992
English
Coiled, light duty spring-type straight pins (ISO 8751 : 1987) English version of DIN EN 28 751
This International Standard specifies the characteristics of light duty coiled spring-type straight pins with metric dimensions and nominal diameters, d1, from 1,5 to 8 mm inclusive.
2009
English
THREADED RODS (INCH SERIES)
This Standard covers the complete general and dimensional data for inch series threaded rods recognized as American National Standard. Included are diameters #4 through 4 in. UNC, UNF, 8UN, and ACME in both right-and left-handed threads. At this time, there are no ISO standards for inch […]
1983
English
Plain washers – Normal series – Product grade A
This International Standard lays down the specification for plain washers of product grade A, preferable for hexagon bolts, screws and nuts of product grades A and B with normal width across flats according to ISO 272, with thread sizes from M 1,6 to M 36 inclusive. When soft material pi […]