JIS B 1014
Countersunk flat head screws— Part 2 : Penetration depth of cross recesses
English
1994
0.000
Detailed Information
This Standard specifies the penetration depth of cross recesses of countersunk flat head screws for the two series 1 and 2 (deep and shallow, respectively).
Download File
(Log in to download spec.)
Check out other specifications
2004
English
Three wires for screw thread measuring and four wires for screw thread measuring
This Japanese Industrial Standard specifies three wires and four wire for screw thread measuring (hereafter referred to as “wires”) which consist of a set of three and four wires respectively, intending to be used for measuring the pitch diameter of thread plug gauges defined in JIS B 025 […]
1998
English
Widening test on nuts
This Standard specifies the test procedure for evaluating the acceptability of surface discontinuities designated in JIS B 1042 excluding nuts made of free cutting steel. It applies to nuts with — nominal thread diameter, d, from 5 mm up to and including 39 mm; — product grades A and B […]
2015
English
High-strength structural bolting assemblies for preloading Part 4: System HV — Hexagon bolt and nut assemblies
This European Standard specifies together with EN 14399-1 and EN 14399-2, the requirements for assemblies of high-strength structural bolts and nuts of system HV suitable for preloaded joints with large widths across flats, thread sizes M12 to M36 and property classes 10.9/10. Bolting a […]
2012
English
Steel wire for mechanical springs – Part 1: Patented cold drawn unalloyed spring steel wire
1.1 This European Standard applies to patented cold drawn unalloyed steel wire of circular cross-section for the manufacture of mechanical springs for static duty and dynamic duty applications. 1.2 In addition to this European Standard, the general technical delivery requirements of EN 1 […]
1985
English
Cast steels for general engineering purposes – Technical delivery conditions
1.1 This standard applies to the grades of cast steel listed in table 1 with specified minimum values for the mechanical properties at ambient temperature. The castings made from these steels are predominantly used at temperatures between -10 and + 300°C. 1.2 See DIN 17 182 for cast stee […]
1971
German
Sechskant-Paßschrauben mit kurzem Gewindezapfen
Bezeichnung einer Sechskant-Paßschraube mit Gewinde d1 = M20, Länge l = 80 mm und Festigkeitsklasse 5.6: Paßschraube M20 x 80 DIN 610 - 5.6 Bezeichnung einer Sechskant-Paßschraube mit Gewinde d1 = M20 X 1,5, Schaftdurchmesser d3 = 21,3 mm, Länge l = 80 mm und Festigkeitsklasse 5.6: Paßsch […]