JIS B 1022

Tolerances for fasteners— Part 3 : Plain washers for bolts, screws and nuts—Product grades A and C

English 1999
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies a selection of tolerances for use in the preparation of the product standards for plain washers, grades A and C, for bolts, screws and nuts with nominal thread diameters from 1 mm up to and including 150 mm. Deviations from the tolerances specified in this Standard are permitted in product standards only for valid technical reasons. It is recommended that these tolerances also be used for non-standard plain washers.

In cases where the maximum material principle according to JIS B 0023 is appropriate to certain features of certain products in the product standards, other tolerances may be applicable.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 661
1993
English

Countersunk head rivets with nominal diameters from 1 to 8 mm

This standard specifies dimensions of steel and nonferrous metal countersunk head rivets with nominal diameters from 1 to 8 mm.
ASTM
ASTM A490M
1993
English

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

1.1 This specification covers the chemical and mechanical requirements of quenched and tempered steel bolts, in nominal thread diameters M16 to M36, inch. These bolts are intended for use in st [...]
ASME
ASME B18.21.1
2009
English

WASHERS: HELICAL SPRING-LOCK, TOOTH LOCK, AND PLAIN WASHERS (INCH SERIES)

This Standard covers the dimensional requirements, physical properties, and related test methods for helical spring-lock washers (# 0 through 3 in.), tooth-lock washers (# 2 through 1-3/4 in.), [...]
ASTM
Abstract of ASTM F468M
1993
English

NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE [METRIC]

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs in nominal thread diameters M6 to M36 inclusive manufactured from a number of a [...]
ASME
ASME B18.7
2007
English

GENERAL PURPOSE SEMI-TUBULAR RIVETS, FULL TUBULAR RIVETS, SPLIT RIVETS, AND END CAPS

This Standard covers complete general and dimensional data for semi-tubular rivets, full tubular rivets, split rivets, and rivet caps for use in general purpose applications. The products descr [...]
DIN ISO
DIN ISO 13715
2000
English

Technical drawings – Edges of undefined shape – Vocabulary and indications

This International Standard defines the terms defining the states of edges and specifies rules for representing states of edges of undefined shape in technical drawings. The proportions and di [...]
JIS
JIS B 1101
1996
English

Slotted head screws

This Japanese Industrial Standard specifies the steel slotted head screws (hereafter, referred to as “steel screws") , stainless steel slotted head screws (hereafter referred to as “stainless s [...]
ASME ANSI
ASME/ANSI B18.3.6M
1993
English

METRIC SOCKET SET SCREWS

1.1.1 This standard contains complete general and dimensional requirements for metric series socket set screws of nominal sizes from 1.6 mm to 24 mm recognized as American National Standard. Al [...]
ISO
ISO 5864
1978
English

ISO inch screw threads – Allowances and tolerances

This International Standard specifies a system of allowances and tolerances for standard thread series, covering the range of diameters from 0.06 to 6 in, and pitches from 80 to 4 threads per inch.