JIS B 1041

Fasteners—Surface discontinuities— Part 1 : Bolts, screws and studs for general requirements

English 1993
0.000
JIS
Detailed Information

This Standard establishes limits for various types of surface discontinuities on bolts, screws and studs for general requirements.

It applies to bolts, screws and studs with
— nominal thread diameters 5 mm and larger;
— product grades A and B;
— property classes up to and including 10.9, unless otherwise specified in product standards or agreed between supplier and purchaser.

Download File
(Log in to download spec.)

Check out other specifications

NASM
NASM 35333
2003
English

WASHER, LOCK, FLAT-INTERNAL TOOTH

MATERIAL: Carbon Steel, Grade 1050 to 1064. hardness 40 to 50 HRC or equivalent. Corrosion-Resistant Steel, Composition 410. Corrosion-resistant Steel, 300 series (UNS S300XX), hardness 35- […]
ISO
ISO 7416
1984
English

Plain washers, chamfered, hardened and tempered for high-strength structural bolting

This International Standard specifies those hardened and tempered circular washers intended for assembIy with large series hexagon high-strength Structural bolts and nuts of diameters from […]
ISO
ISO 4775
1984
English

Hexagon nuts for high-strength structural bolting with large width across flats – Product grade B – Property classes 8 and 10

This International Standard gives specifications for large series hexagon, high-strength structural nuts with metric dimensions in property classes 8 and 10 and thread sizes from M12 up to […]
DIN
DIN 6914
1989
English

High-strength hexagon head bolts with large widths across flats for structural steel bolting

High-strength hexagon head bolts are intended for use in GV and SL structural steel bolting in accordance with DIN 18800 Part 1, together with DIN 6915 hexagon nuts and DIN 6916, DIN 6917 o […]
BS EN
BS EN 20898-2
1994
English

Mechanical properties of fasteners – Part 2: Nuts with specified proof load values – Coarse thread

This International Standard specifies the mechanical properties of nuts with specified proof load values when tested at room temperature (see ISO 1). Properties will vary at higher and lowe […]
BS EN
BS EN 12163
2011
English

Copper and copper alloys — Rod for general purposes

This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy rod in the shape of circles, squares, hexagons or octagons, finally produ […]
DIN EN
DIN EN 28741
1992
English

Half-length reverse taper grooved pins (ISO 8741 : 1986) English version of DIN EN 28 741

This International Standard specifies the characteristics of half-length reverse taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surfac […]
ASTM
Abstract of ASTM F436
2000
English

HARDENED STEEL WASHERS

This specification covers the chemical, mechanical, and dimensional requirements for hardened steel washers for use with fasteners having nominal thread diameters of 1/4 through 4 in. These […]
ISO
ISO 725
1978
English

ISO inch screw threads – Basic dimensions

This International Standard specifies the basic dimensions, in inches, of ISO inch screw threads according to ISO 263, ISO inch screw threads - General plan and selection for screws, bolts […]