JIS B 1044

Fasteners—Electroplated coatings

English 2001
0.000
JIS
Detailed Information

This Standard specifies dimensional requirements for electroplated fasteners of steel or copper alloy. It specifies coating thicknesses and gives recommendations for hydrogen embrittlement relief for fasteners with high tensile strength or hardness and for surface-hardened fasteners.

This Standard primarily concerns the electroplating of threaded fasteners, but it may also be applied to other threaded parts. For the applicability to screws that cut or form their own mating threads, see clause 8.

The specifications given in this Standard may also be applied to non – threaded parts such as washers and pins.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 1479
1998
English

Hexagon turnbuckles

This standard specifies dimensions and technical delivery conditions for sizes M6 to M30 hexagon turnbuckles with widths across flats as in ISO 272, of product grade A and made of steel or aust [...]
ASTM
ASTM F880
2008
English

STAINLESS STEEL SOCKET-SET SCREWS

1.1 This specification covers the requirements for austenitic grade stainless steel socket-set screws (SSS) sizes 0.060 through 0.500 in., in two conditions, AF and CW. 1.2 Units一The values s [...]
ASME
ASME B18.6.2
2005
English

SLOTTED HEAD CAP SCREWS, SQUARE HEAD SET SCREWS, AND SLOTTED HEADLESS SET SCREWS (INCH SERIES)

This Standard covers the complete general and dimensional data for the various styles of slotted head cap screws and square head and slotted headless set screws recognized as “American National [...]
ASTM
ASTM A307
2010
English

CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH

1.1 This specification covers the chemical and mechanical requirements of three grades of carbon steel bolts and studs in sizes 1/4 in. through 4 in. The fasteners are designated by “Grade" den [...]
DIN
DIN 7968
1999
English

Steel hexagon fit bolts for structural steel bolting, for supply with hexagon nuts

This standard specifies dimensions and technical delivery conditions for M12 to M30 steel hexagon fit bolts of product grade C for use in structural steel bolting. It also specifies the nuts an [...]
NASM
NASM 35206
2004
English

SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM PLATED, UNC-2A

THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/2. ACCEPTABILITY OF SCREW THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/20, SYSTEM 21.
JIS
JIS B 1057
2001
English

Mechanical properties of non-ferrous metal fasteners

This Japanese Industrial Standard specifies the mechanical properties of bolts (including studs), machine screws and nuts made of non-ferrous metals such as copper, copper alloys and aluminium [...]
DIN
DIN 4000-9
1986
English

Tabular layouts of article characteristics for bolts, pins, rivets, and keys

This standard specifies tabular layouts, in accordance with DIN 4000 Part 1, for standardized and non-standardized bolts, pins, rivets, and keys.
ASTM
Abstract of ASTM B695
2000
English

COATINGS OF ZINC MECHANICALLY DEPOSITED ON IRON AND STEEL

1.1 This specification covers the requirements for a coating of zinc mechanically deposited on iron and steel basis metals. The coating is provided in several thicknesses up to and including 10 [...]