JIS B 1071

Method of verification for size and geometry of threaded fasteners

English 1985
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies the methods of verifying whether the characteristic values related to the forms and dimensions given to threaded fasteners, hereinafter referred to as the “characteristic values”, are within the tolerance zone based on JIS B 1021, hereinafter referred to as the “measuring methods”.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
ASTM F468M
1997
English

Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws. and studs in nominal thread diameters M6 to M36 inclusive manufactured from a number of a [...]
ASTM
Abstract of ASTM F1137
1993
English

PHOSPHATE/OIL AND PHOSPHATE/ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS

1.1 This specification covers the basic requirements for three grades of corrosion protective coatings for fasteners. Grade I consists of a zinc phosphate coating with a supplemental protective [...]
JIS
JIS B 1009
1991
English

Bolts, screws and studs — Nominal lengths, and thread lengths for general purpose bolts

This Japanese Industrial Standard specifies nominal lengths to be applied to external thread parts of bolts, machine screws, etc. to be used generally and thread lengths for general purpose bol [...]
ASTM
ASTM F467
2008
English

NONFERROUS NUTS FOR GENERAL USE

1.1 This specification covers the requirements for commercial wrought nonferrous nuts 0.250 to 1.500 in. inclusive in diameter in a number of alloys in common use and intended for general servi [...]
SAE
SAE J493
1961
English

Rod Ends and Clevis Pins

The following publications form a part of the specification to the extend specified herein. Unless otherwise indicated the latest revision of SAE publications shall apply. SAE J1010-Emission C [...]
ASME
ASME B18.6.1
1997
English

WOOD SCREWS

This standard covers the complete general and dimensional data for the various types of slotted and recessed head wood screws recognized as "American National Standard." Also included are appen [...]
IFI
IFI-137
2008
English

INSPECTION AND QUALITY ASSURANCE FOR GENERAL PURPOSE BLIND RIVETS

This standard outlines the inspection plan to be used when lot compliance after shipment of general purpose blind rivets is questioned by the user. The producer is responsible for supplying a p [...]
DIN EN
DIN EN 10083-1
2006
German

Vergütungsstähle – Teil 1: Allgemeine technische Lieferbedingungen; Deutsche Fassung EN 10083-1:2006

Dieser Teil der EN 10083 enthält die allgemeinen technischen Lieferbedingungen für ⎯ Halbzeug, warmgeformt, zum Beispiel Vorblöcke, Knüppel, Vorbrammen (siehe Anmerkungen 2 und 3), ⎯ Stabstahl [...]
ASTM
Abstract of ASTM A574
2000
English

ALLOY STEEL SOCKET HEAD CAP SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket head cap screws, 0.060 through 4 in. in diameter where high strength is required. NOTE 1 - A [...]