JIS B 1082

Stress area and bearing area for threaded fasteners

English 1987
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies the stress area of metric screw thread and the area of the part where a load due to the contact of the bearing surface of threaded fastener and the other side is added, hereinafter referred to as the ”load area”.

Furthermore, the method to obtain the stress area of unified thread is shown in Reference .

Download File
(Log in to download spec.)

Check out other specifications

SAE
SAE J123
1994
English

SURFACE DISCONTINUITIES ON BOLTS, SCREWS, AND STUDS IN FATIGUE APPLICATIONS

This SAE Recommended Practice defines, illustrates, and specifies allowable limits for various types of surface discontinuities that may occur or become apparent during the manufacture and […]
DIN EN
DIN EN 28743
1992
English

Half-length centre grooved pins (ISO 8743 : 1986) English version of DIN EN 28 743

This International Standard specifies the characteristics of half-length centre grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with […]
DIN EN
DIN EN 24035
1992
English

Hexagon thin nuts (chamfered) Product grades A and B (ISO 4035 : 1986) English version of DIN EN 24 035

This International Standard gives specifications for chamfered hexagon thin nuts, with thread diameters from M1,6 to M64 inclusive, with product grade A for sizes d < M16 and product grade […]
SAE
SAE J1237
1996
English

METRIC THREAD ROLLING SCREWS

This SAE standard covers requirements for metric thread rolling screws suitable for use in general engineering applications. Requirements for three material-process options are stated: a. […]
DIN EN
DIN EN 28749
1992
English

Determination of shear strength of pins (ISO 8749 : 1986) English version of DIN EN 28 749

This International Standard specifies the test method for shear testing of metallic pins with nominal diameters from 0,8 to 25 mm inclusive.
ASTM
ASTM A513/A513M
2012
English

Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

1.1 This specification covers electric-resistance-welded carbon and alloy steel tubing for use as mechanical tubing. 1.2 This specification covers mechanical tubing made from hot- or cold-r […]
SAE
SAE AS8879
2001
English

Screw Threads – UNJ Profile, Inch

This SAE Aerospace Standard (AS) specifies the characteristics of the UNJ profile inch series of screw threads, to include a mandatory controlled radius of 0.18142P to 0.15011P at the root […]
DIN
DIN 927
1986
English

Slotted shoulder screws

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in […]
BS EN
BS EN 20898-2
1994
English

Mechanical properties of fasteners – Part 2: Nuts with specified proof load values – Coarse thread

This International Standard specifies the mechanical properties of nuts with specified proof load values when tested at room temperature (see ISO 1). Properties will vary at higher and lowe […]