JIS B 1083

General rules for tightening of threaded fasteners

English 1990
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies general matters relating to significance of tightening by combination of bolt and nut, basis of tightening and representative control method.

Further, this Standard is applicable to tightening by threaded fasteners other than bolt and nut, and to tightening by combination of threaded fasteners and screws of structure body, as appropriate. However, this is not applicable to set screws which give compressive force the external thread fastener, to wood screws and tapping screws of which external thread fastener itself conduct tapping, and to tightening of threaded fasteners provided with special self – locking function.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 5417
1976
English

Securing Parts for Rolling Bearings – Snap Rings for Bearings with Ring Groove

For connection with DIN 616 and ISO 464, see Explanations. This Standard specifies the dimensions of snap rings required for securing bearing with ring groove according to DIN 616, diamete […]
JIS
JIS B 1115
1996
English

Slotted head tapping screws

This Japanese Industrial Standard specifies the steel slotted head tapping screws (hereafter, referred to as “steel tapping screws”) for general use.
DIN
DIN 314
1999
English

Wing nuts with edged wings

This standard specifies dimensions, designation and technical delivery conditions for M 4 to M 12 wing nuts with edged wings, of product grade C and made of malleable cast iron, steel or co […]
DIN
DIN 984
1981
English

Spring retaining rings with lugs for use in bores (internal circlips)

For the purpose of this standard, internal circlips are spring retaining rings for fitting in bores (grooves). They have an eccentric form and have a number of lugs of equal depth uniformly […]
JIS
JIS B 1117
1995
English

Slotted set screws

This Japanese Industrial Standard specifies the steel made slotted set screws (hereafter, referred to as "steel set screws"), and stainless steel made set screws (hereafter, referred to as […]
BS EN ISO
BS EN ISO 2320
2008
English

Prevailing torque type steel nuts — Mechanical and performance properties (ISO 2320:2008)

This International Standard specifies the mechanical and performance properties for prevailing torque type steel nuts when tested at an ambient temperature range of +10 °C to +35 °C. It inc […]
ISO
ISO 7414
1984
English

Hexagon nuts for structural bolting with large width across flats. style 1 – Product grade B – Property class 10

This International Standard gives specifications for large series hexagon nuts, style 1, property class 10, with metric dimensions and thread sizes from M12 up to and including M36, for use […]
ISO
ISO 3269
1988
English

Fasteners – Acceptance inspection

1.1 This International Standard specifies the procedure to be followed by the purchaser at his acceptance inspection in order to decide whether a lot of fasteners may be accepted or rejecte […]
ISO
ISO 2009
1983
English

Slotted countersunk head screws (common head style) – Product grade A

This International Standard specifies the characteristics of slotted countersunk head screws in product grade A and with thread sizes M 1,6 to M 10 inclusive.