JIS B 1087

Blind rivets — Mechanical testing

English 2000
0.000
JIS
Detailed Information

This Standard specifies the methods of mechanical testing execute under the ambient temperature of 10 °C to 35 °C of blind rivets (hereafter referred as “rivets”) including:
— shear test (see clause 3),
— tensile test (see clause 3),
— mandrel head retention capability test (see clause 4),
— mandrel push out resistance test (prior to setting) (see clause 5), and
— mandrel break load test (see clause 6).
It applies to blind rivets with nominal diameters up to and including 6.4 mm.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 6907
1990
English

Serrated lock washers with external teeth for screw and washer assemblies

Serrated lock washers as specified in this standard are intended tor use with screw and washer assemblies as specified in DIN 6900 Part 4. Serrated lock washers are mainly designed to provide e [...]
IFI
IFI-530
1999
English

METRIC STRUCTURAL SPLITTING SELF-PLUGGING PULL MANDREL BLIND RIVETS

This standard establishes the dimensional, mechanical, and performance requirements for metric structural splitting self-plugging pull mandrel blind rivets suitable for use in engineering assem [...]
DIN
DIN 980
1987
English

All-metal prevailing torque type hexagon nuts

This standard specifies requirements for M3 to M39 prevailing torque type hexagon nuts (all-metal nuts), assigned to product grade A for sizes up to M16, and to product grade B for sizes over M16.
DIN EN
DIN EN 24018
1992
English

Hexagon head screws – Product grade C (ISO 4018: 1988) English version of DIN EN 24 018

This International Standard gives specifications for hexagon head screws with threads from M5 up to and including M64, of product grade C.
ASTM
Abstract of ASTM F835
2000
English

ALLOY STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket button (SBHCS) 0.060 through 0.625 in. thread sizes and flat countersunk (SFHCS) 0.060 throug [...]
SAE
SAE J1237
1996
English

METRIC THREAD ROLLING SCREWS

This SAE standard covers requirements for metric thread rolling screws suitable for use in general engineering applications. Requirements for three material-process options are stated: a. Scr [...]
DIN EN
DIN EN 10269
1999
English

Steel and nickel alloys for fasteners with specified elevated and/or low temperature properties – English version of DIN EN 10269

This European Standard specifies requirements for semi-finished products, bars and rods for fasteners with properties specified at elevated and/or low temperature made of non-alloy and alloy (i [...]
ASTM
Abstract of ASTM F879
2002
English

STAINLESS STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS

1.1 This specification covers the chemical and mechanical requirements for stainless steel inch hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws with nominal thread 0. [...]
DIN
DIN 1681
1985
English

Cast steels for general engineering purposes – Technical delivery conditions

1.1 This standard applies to the grades of cast steel listed in table 1 with specified minimum values for the mechanical properties at ambient temperature. The castings made from these steels a [...]