JIS B 1101

Slotted head screws

English 1996
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies the steel slotted head screws (hereafter, referred to as “steel screws”) , stainless steel slotted head screws (hereafter referred to as “stainless steel screws”) and nonferrous metal slotted head screws (hereafter referred to as “nonferrous metal screws”) for general use.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
ASTM F912
2004
English

ALLOY STEEL SOCKET SET SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel socket-set screws (SSS) 0.060 through 2.000-in. sizes having hardnesses 45 to 53 HRC. 1.2 These set screws [...]
ISO
ISO 14584
2001
English

Hexalobular socket raised countersunk head screws

This International Standard specifies the characteristics of hexalobular socket raised countersunk head screws in product grades A and with thread sizes from M2 to M10 inclusive.
JIS
JIS B 1021
2003
English

Tolerances for fasteners — Part 1 : Bolts, screws, studs and nuts — Product grades A, B and C

This Standard specifies a selection of tolerances for bolts, screws, studs and nuts with ISO metric threads and with product grades A, B and C and for tapping screws with product grade A.
ISO
ISO 8676
1988
English

Hexagon head screws with metric fine pitch thread – Product grades A and B

This International Standard gives specifications for hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 to 64 mm, of product grade A for nominal thread diame [...]
DIN
DIN 7168
1991
English

General tolerances for linear and angular dimensions and geometrical tolerances (not to be used tor new designs)

This standard is intended to ensure that all drawings prepared to date In which general tolerances have been specified on the basis of DIN 7168 will remain intelligible and be interpreted corre [...]
JIS
JIS B 1002
1985
English

Dimensions of widths across flats

This Japanese Industrial Standard specifies the dimensions of widths across flats applied to threaded fasteners and spanners and the dimensions of widths across flats corresponding to the threa [...]
ASTM
ASTM A276
2010
English

Standard Specification for Stainless Steel Bars and Shapes

1.1 This specification covers hot-finished or cold-finished bars except bars for reforging (Note 1). It includes rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles [...]
DIN
DIN 50021
1988
English

Salt spray testing

This standard specifies the requirements which corrosion testing apparatuses and corrosive agents must meet in salt spray testing, the aim being to enable identical conditions to be reproduced [...]
DIN
DIN 7998
1975
English

Threads and Thread Ends for Wood Screws

Designation of a wood screw thread of nominal diameter d1 = 4 mm: Thread 4 DIN 7998