JIS B 1116

Slotted head machine screws for precision instruments

English 1980
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies the steel slotted head machine screws, herein after referred to as the “steel machine screws”, brass slotted head machine screws, hereinafter referred to as the ” brass machine screws”, and stainless steel slotted head machine screws, hereinafter referred to as the “stainless steel machine screws”, to be used for the precision instruments such as optical instruments and measuring instruments.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 1587
1987
English

Hexagon domed cap nuts

This standard specifies requirements for M 4 to M 24 coarse and fine pitch thread hexagon domed cap nuts assigned to product grade A or B. If, in special cases, nuts are to comply with spe […]
DIN
DIN 964
1970
English

Slotted Raised Countersunk (Oval) Head Screws (Countersunk Heads according to ISO)

Intermediate lengths should as fer as possible be avoided. Lengths over 60 mm should be arranged in 10 mm steps. Normally these screws are manufactured in the sizes characterized by the q […]
MIL
MIL-DTL-1222J
2000
English

STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED

This specification covers standard studs, hex cap screws, and heavy hex bolts in nominal standard diameters of 1/4 inch to 4 inches, nuts in nominal standard diameters of 1/4 inch to 3 inch […]
ANSI ASME
ANSI/ASME B18.5.2.2M
1993
English

METRIC ROUND HEAD SQUARE NECK BOLTS

1.1 This standard covers the complete general and dimensional data for metric series round head square neck bolts recognized as American National Standard, and intended for general applicat […]
DIN
DIN 6925
1987
English

Prevailing torque type all-metal hexagon nuts

This standard specifies requirements for M 3 to M 36 prevailing torque type all-metal hexagon nuts assigned to product grade A (for sizes up to M 16) and product grade B (for sizes over M 1 […]
JIS
JIS B 1129
2004
English

Tapping screw washer assemblies with plain washers

This Standard specifies the requirements for tapping screw and plain washer assemblies with spaced threads from ST2.2 to ST9.5 inclusive, flat seating heads and mechanical properties in acc […]
DIN
DIN 1478
1975
English

Turnbuckles Made from Steel Tube or Round Steel Bar

The dimensions of turnbuckle nuts up to M 48 have been related to tubes according to DIN 2448 and brought into line with DIN 82004.
JIS
JIS B 0176-1
2002
English

Threading tools—Vocabulary Part 1 : Taps

This part of JIS B 0176 specifies terms and definitions related to the taps to be used mainly for metal workings in general.
ISO
ISO 4757
1983
English

Cross recesses for screws

This International Standard defines two types of cross recesses for screws: - recess type H; - recess type Z. Included in this International Standard is a method of penetration gauging for both types.