JIS B 1117

Slotted set screws

English 1995
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies the steel made slotted set screws (hereafter, referred to as “steel set screws”), and stainless steel made set screws (hereafter, referred to as “stainless steel set screws” ) for general use.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 1587
1987
English

Hexagon domed cap nuts

This standard specifies requirements for M 4 to M 24 coarse and fine pitch thread hexagon domed cap nuts assigned to product grade A or B. If, in special cases, nuts are to comply with specifi [...]
ISO
ISO 1207
1992
English

Slotted cheese head screws – Product grade A

This International Standard specifies the characteristics of slotted cheese head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications oth [...]
DIN
DIN 6796
1987
English

Conical spring washers for bolt/nut assemblies

Conical spring washers covered in this standard are deemed to be spring washers designed for use for bolt/nut assemblies involving bolts of property classes 8.8 to 10.9 as specified in ISO 898 [...]
ASTM
Abstract of ASTM F844
2000
English

UNHARDENED STEEL WASHERS

1.1 This specification covers round and miscellaneous shape steel plain (flat) washers furnished in an unhardened condition. 1.2 The washers are intended for general use bolt, nut, and stud app [...]
DIN
DIN 526
1973
English

Safety Cups for Cheese Head Screws according to DIN 84

Material: St 1303 according to DIN 1623 or St 3 according to DIN 1624 at manufacturer’s choice Finish: without burr
DIN
DIN 7993
1970
English

Round Wire Snap Rings and Snap Ring Grooves for Shafts and Bores

The standard DIN 9045 contains snap rings capable of use in like manner for external and internal retaining duty. This necessarily entails a gap between the two ends of the wire to permit insta [...]
SAE
SAE J429
2011
English

MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS

This SAE standard covers the mechanical and material requirements for inch-series steel bolts, screws. studs. screws for sems, and U-bolts used in automotive and related industries in sizes to [...]
BS EN ISO
BS EN ISO 8752
2009
English

Spring-type straight pins — Slotted, heavy duty

This International Standard specifies the characteristics of slotted spring-type straight pins, made of steel or of austenitic or martensitic stainless steel, heavy duty, with nominal diameter, [...]
DIN EN
DIN EN 10346
2009
English

Continuously hot-dip coated steel flat products – Technical delivery conditions – English version of DIN EN 10346:2009-07

This European Standard specifies requirements for continuously hot-dip coated products made of low carbon steels for cold forming, of steels for construction, of steels with high proof strength [...]