JIS B 1124

Drilling screws with tapping screw thread

English 2003

0.000

Detailed Information

This Standard is the Japanese Industrial Standard prepared based on first editions of ISO 15480 Hexagon washer head drilling screws with tapping screw thread, ISO 15481 Cross recessed pan head drilling screws with tapping screw thread, ISO 15482 Cross recessed countersunk head drilling screws with tapping screw thread and ISO 15483 Cross recessed raised countersunk head drilling screws with tapping screw thread published in 1999, the text of which contains, through integrating and compiling, the corresponding parts (shape and dimensions, product specification and designation) in the said International Standards without modifying the technical contents and, in addition, Annex 1 (normative) which consists of the specifications of the drill pointed drilling screws which have different characteristics from those specified in ISO 15480 to ISO 15483, and which had been covered by the former Japanese Industrial Standard.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 7972

1970

English

Countersunk (Flat) Head Tapping Screws with Slot

Normally, these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data. Technical condi [...]

SAE

SAE J78

1998

English

Steel Self-Drilling Tapping Screws

1.1 General—This SAE Standard covers the dimensional and general specifications, including performance requirements, for carbon steel self-drilling tapping screws suitable for use in general ap [...]

2.01

ISO

ISO 14579

2001

English

Hexalobular socket head cap screws

This International Standard specifies the characteristics of hexalobular socket head cap screws with thread sizes from M2 up to and including M20, of product grade A.

JIS

JIS B 1042

1998

English

Fasteners—Surface discontinuities— Part 2 : Nuts

This Standard establishes limits for various types of surface discontinuities on nuts. It applies to nuts with — nominal thread diameters from 5 mm up to and including 39 mm; — product grade [...]

DIN

DIN 6330

1991

English

Hexagon nuts with a height of 1,5 d

This standard specifies hexagon nuts designed for use with bolts in assemblies that will be frequently disassembled and reassembled. They are provided with a spherical bearing face which, in co [...]

ASTM

Abstract of ASTM A574M

1997

English

ALLOY STEEL SOCKET HEAD CAP SCREWS [METRIC)

1.1 This specification covers the requirements for quenched and tempered alloy steel socket head cap screws 1.6 mm through 48 mm in diameter having a minimum ultimate tensile strength of 1220 MPa.

NASM

NASM 35307

1999

English

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A

MECHANICAL PROPERTIES: The minimum tensile strength in load pounds, indicated in Table I is based on 80,000 PSI Minimum Tensile Strength for diameters through .625 inch and 70,000 PSI Minimum T [...]

DIN

DIN 261

1987

English

T-head bolts

This standard specifies M8 to M100 x 6 T-head bolts. They are designed for use in attaching components to foundations or similar structures by means of T-sIots, such as are specified in DIN 649 [...]

DIN

DIN 50150

1976

English

Testing of Steel and Cast Steel – Conversion Table for Vickers Hardness, Brinell Hardness, Rockwell Hardness and Tensile Strength

The conversion table In this Standard applies - to hardness values determined according to the following standards: ~DIN 50 103 Part 1 and Part 2 (Rockwell) ~DIN 50 133 Part 1 (Vickers) and ~DI [...]