JIS B 1125

Self drilling tapping screws

English 2003
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies self drilling tapping screws of steel made (hereafter referred to as “steel drilling tapping screws”) and those of martensitic stainless steel made (hereafter referred to as “stainless steel drilling tapping screws”) for general use.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 6903
1990
English

Plain washers for tapping screw and washer assemblies

Washers as specified in this standard are intended for use with DIN 6901 tapping screw and washer assemblies.
DIN
DIN 1445
1977
English

Clevis pins with head and stud end

The specifications of this standard are related to those of DIN EN 22340 and DIN EN 22341, the technical delivery conditions (cf. clauses 2 to 4) largely conforming to ISO 3269.
IFI
IFI-551
1999
English

METRIC STRUCTURAL FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS

This standard establishes the dimensional, mechanical and performance requirements of metric structural flush break pull mandrel self-plugging blind rivets suitable for use in joining the compo [...]
JIS
JIS B 1101
1996
English

Slotted head screws

This Japanese Industrial Standard specifies the steel slotted head screws (hereafter, referred to as “steel screws") , stainless steel slotted head screws (hereafter referred to as “stainless s [...]
ASTM
ASTM C1002
2007
English

STEEL SELF-PIERCING TAPPING SCREWS FOR THE APPLICATION OF GYPSUM PANEL PRODUCTS OR METAL PLASTER BASES TO WOOD STUDS OR STEEL STUDS

1.1 This specification covers steel self-piercing tapping screws for use in fastening gypsum panel products and metal plaster bases to cold-formed steel studs less than 0.033 in. (0.84 mm) in t [...]
DIN
DIN 7984
1985
English

Hexagon socket thin head cap screws

This standard specifies product grade A hexagon socket thin head cap screws with ISO metric screw thread from size M3 up to and including size M 24. If, in special cases, the screws are to mee [...]
DIN EN
DIN EN 22339
1992
English

Unhardened taper pins (ISO 2339 : 1986) English version of DIN EN 22 339

This International Standard specifies the characteristics of unhardened taper pins, with metric dimensions and nominal diameters, d, from 0,6 to 50 mm inclusive.
DIN
DIN 7168
1991
English

General tolerances for linear and angular dimensions and geometrical tolerances (not to be used tor new designs)

This standard is intended to ensure that all drawings prepared to date In which general tolerances have been specified on the basis of DIN 7168 will remain intelligible and be interpreted corre [...]
DIN
DIN 555
1972
English

Hexagon Nuts Metric Thread Type g

Tho dimensions of the hexagon nuts according to this Standard correspond with those indicated in the ISO Recommendation ISO/R 272-1968 published by the International Organization for Standardiz [...]