JIS B 1128

Hexalobular socket head tapping screws

English 2004
5.001
JIS
Detailed Information

This Standard specifies the characteristics of hexalobular socket head tapping screws with nominal thread size from ST2.9 to ST6.3. If specifications other than those listed in this Standard are required, they should be selected from existing JIS standards, for example, JIS B 1007, JIS B 1021 and JIS B 1055.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 1587
2000
English

Hexagon domed cap nuts

This standard specifies dimensions and technical delivery conditions for sizes M4 to M24 coarse and fine pitch thread hexagon domed cap nuts of product grades A and B.
ANSI ASME
ANSI/ASME B18.6.3
1998
English

SQUARE AND HEX MACHINE SCREW NUTS

1. ANSI/ASME B18.6.3 is a standard developed through the procedures of The American Society of Mechanical Engineers. B18.6.3 is under the jurisdiction of ASME Standards Committee B18 and is the [...]
DIN
DIN 95
1986
English

Slotted raised countersunk (oval) head wood screws

The following amendments have been made in comparison with the March 1975 edition. a) Nominal lengths 90 mm and 100 mm have been deleted in order to bring this standard into line with the other [...]
ASME
ASME B18.3
2008
English

SOCKET CAP, SHOULDER, AND SET SCREWS, HEX AND SPLINE KEYS (INCH SERIES)

1.1.1 This Standard covers complete general and dimensional data for various types of hexagon and spline (fluted) socket cap screws, shoulder screws, set screws, and hexagon and spline keys rec [...]
JIS
JIS B 1119
1995
English

Machine screws and nuts for spectacle frames

This Japanese Industrial Standard specifies the machine screws made of stainless steel, brass, and nickel silver (hereafter referred to as “machine screws”) as well as the nuts made of nickel silver.
ASTM
Abstract of ASTM A153M
1995
English

ZINC COATING (HOT-DIP) ON IRON AND STEEL HARDWARE

1.1 This specification covers zinc coatings applied by the hot-dip process on iron and steel hardware. 1.2 This document is intended to be applicable to hardware items that are centrifuged or o [...]
DIN EN
DIN EN 24034
1992
English

Hexagon nuts – Product grade C (ISO 4034 : 1986) English version of DIN EN 24 034

This International Standard gives specifications for hexagon nuts . with thread diameters from M5 to M64 inclusive and product grade C.
DIN
DIN 603
1981
English

Mushroom head square neck bolts

This standard specifies mushroom head square neck bolts with metric threads M 5 to M 20 of product grade C.
BS EN
BS EN 1665
1997
English

Hexagon bolts with flange — Heavy series

This European Standard specifies characteristics of hexagon bolts with flange, heavy series, with threads from M5 up to and including M20 and with property classes 8.8, 10.9 and A2-70.