JIS B 1129

Tapping screw washer assemblies with plain washers

English 2004
0.000
JIS
Detailed Information

This Standard specifies the requirements for tapping screw and plain washer assemblies with spaced threads from ST2.2 to ST9.5 inclusive, flat seating heads and mechanical properties in accordance with JIS B 1055.

The plain washers are captive, i.e. prevented from disassembly and free to rotate.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 7040
2012
English

Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10

This International Standard specifies the characteristics of prevailing torque type hexagon regular nuts (with non-metallic insert), with threads from M3 up to and including M36, in product gra [...]
ASTM
Abstract of ASTM F467M
1993
English

NONFERROUS NUTS FOR GENERAL USE

1.1 This specification covers the requirements for commercial wrought nonferrous nuts in nominal thread diameters M6 to M36 inclusive in a number of alloys in common use and intended for genera [...]
ASTM
ASTM A502
1993
English

Standard Specification for Steel Structural Rivets

1.1 This specification covers three grades of steel rivets in diameters from 1/2 to 1 1/2 in. ( 13 to 38 mm), inclusive, for structural fabricating purposes. The grades are as follows: 1.1.1 Gr [...]
DIN
DIN 1444
1974
German

Bolzen – mit Kopf – Maße nach ISO

2. Werkstoft Sl = 95MnPb2BK (nach DIN 1651) order Cq35 (nach DIN 1654) nach Wahl des Herstellers Andere Werkstoffe nach Vereinbarung
ASTM
Abstract of ASTM A194/A194M
2010
English

CARBON AND ALLOY STEEL NUTS FOR BOLTS FOR HIGH PRESSURE OR HIGH TEMPERATURE SERVICE, OR BOTH

1.1 This specification covers a variety of carbon, alloy, and martensitic stainless steel nuts in the size range 1/4 through 4 in. nominal. It also covers austenitic stainless steel nuts in the [...]
ANSI
ANSI B18.2.3.8M
1991
English

METRIC HEX LAG SCREWS

1.1 This standard covers the complete general and dimensional data for metric hex lag screws recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is [...]
DIN
DIN 604
1981
English

Flat countersunk nib bolts

This standard specifies flat countersunk nib bolts with metric threads M 6 to M 24 of product grade C.
NASM
NASM 35307
1999
English

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A

MECHANICAL PROPERTIES: The minimum tensile strength in load pounds, indicated in Table I is based on 80,000 PSI Minimum Tensile Strength for diameters through .625 inch and 70,000 PSI Minimum T [...]
ASTM
Abstract of ASTM F837M
1991
English

STAINLESS STEEL SOCKET HEAD CAP SCREWS [METRIC]

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric socket head cap screws (SHCS) with nominal thread M1.6 through M36 and intended for use in appl [...]