JIS B 1163

Square nuts

English 2001
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies the steel square nuts for general use (hereafter referred to as “nuts”). However, the square nuts to be used for wood working are excluded.

The strength classes 4T to 6T of the mechanical properties specified in this Standard are to be disused in the future, and the mechanical properties in the Annex 1 or the Annex 2 to JIS B 1052 are to be introduced.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 922
1986
English

Slotted pan head screws with small head and full dog point

The following amendments have been made in comparison with the August 1972 edition. a) Size M1.8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN 267 Part 2, April 1968 edition, has been replaced by product grade F as specified in DIN 267 Pa […]
ISO
ISO 1207
1992
English

Slotted cheese head screws – Product grade A

This International Standard specifies the characteristics of slotted cheese head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications others than those listed in this International Standard are required, they should be selected from […]
SAE
SAE J121M
1996
English

DECARBURIZATION IN HARDENED AND TEMPERED METRIC THREADED FASTENERS

This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special […]
DIN
DIN 315
1998
English

Wing nuts with rounded wings

This standard specifies requirements for M4 to M24 wing nuts with rounded wings, of product grade C and made of malleable cast iron, steel or copper-zinc alloy.
DIN
DIN 984
1981
English

Spring retaining rings with lugs for use in bores (internal circlips)

For the purpose of this standard, internal circlips are spring retaining rings for fitting in bores (grooves). They have an eccentric form and have a number of lugs of equal depth uniformly distributed around the circumference. Circlips are suitable for retaining machine components which […]
ASTM
ASTM F468
2010
English

NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs 0.250 to 1.500 in. inclusive in diameter manufactured from a number of alloys in common use and intended for general service applications. 1.2 Applicable nuts for use with bol […]