JIS B 1166
T-Slot bolts
English
1995
0.000
Detailed Information
This Japanese Industrial Standard specifies steel-made T-slot bolts (hereafter, referred to as “bolts”) to be used mating with T slots (JIS B 0952).
The strength class 6T of mechanical properties specified in this Standard will be withdrawn on April 1, 1999.
Download File
(Log in to download spec.)
Check out other specifications
2008
English
MECHANICAL TESTING OF BLIND RIVETS
1.1 Scope. This standard describes procedures for the mechanical testing of inch series blind rivets to determine properties required in the product standard. 1.2 The following tests are described: Shear strength, Para. 2.1 Tensile strength, Para. 2.2 Mandrel break load, Para. 2.3 Blind h […]
1971
English
Cross Recessed Countersunk (Flat) Head Screws (Countersunk Heads according to ISO)
Normally these screws are made in the sizes !or which weight details are given. If the screws are to be supplied with captive washer components, the designation must be augmented according to DIN 6900.
1987
English
Spring lock washers with square ends or tang ends
Spring lock washers covered in this standard are deemed to be spring washers designed for use with bolt/nut assemblies involving fasteners of property class 5.8 or less, as specified in ISO 898 Part 1. They are intended to counteract the effect of setting which results in bolt/nut assembl […]
2007
English
Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
1.1 This specification covers cold-finished carbon and alloy steel bars produced in straight length and coil to chemical compositions. Cold-finished bars are suitable for heat treatment, for machining into components, or for use in the as-finished condition as shafting, or in construction […]
1990
English
Reduced shank bolts and screws with coarse thread
This standard specifies requirements for M 2,5 to M 30 bolts and screws ('bolts', for short) with various head styles and a diameter of the unthreaded portion of the shank smaller than the minor diameter. Although such bolts have a reduced shank, they are not waisted shank bolts. In addi […]
2011
English
Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel screws of property class 4.8
This part of ISO 7046 specifies the characteristics of countersunk flat head screws with threads from M1,6 to M10 inclusive, of product grade A and property class 4.8, and with type H or type Z cross recess. If, in special cases, specifications other than those listed in this part of ISO […]