JIS B 1176

Hexagon socket head cap screws

English 2000
0.000
JIS
Detailed Information

This Standard specifies the characteristics of hexagon socket head cap screws with threads from M1.6 up to and including M64 and product grade A.

Gauging of hexagon sockets is specified in Annex A. For approximate masses of screws see Annex B.

If, in special cases, specifications other than those listed in this Standard are required, they should be selected from existing standards, for example JIS B 0205, JIS B 0207, JIS B 0209, JIS B 0211, JIS B 1009, JIS B 1021, JIS B 1051 and JIS B 1054.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 1044
2001
English

Fasteners—Electroplated coatings

This Standard specifies dimensional requirements for electroplated fasteners of steel or copper alloy. It specifies coating thicknesses and gives recommendations for hydrogen embrittlement relief for fasteners with high tensile strength or hardness and for surface-hardened fasteners. Thi […]
ISO
ISO 2009
1983
English

Slotted countersunk head screws (common head style) – Product grade A

This International Standard specifies the characteristics of slotted countersunk head screws in product grade A and with thread sizes M 1,6 to M 10 inclusive.
SAE
SAE J123
1994
English

SURFACE DISCONTINUITIES ON BOLTS, SCREWS, AND STUDS IN FATIGUE APPLICATIONS

This SAE Recommended Practice defines, illustrates, and specifies allowable limits for various types of surface discontinuities that may occur or become apparent during the manufacture and processing of bolts, screws, and studs which are primarily intended for use in automotive assemblies […]
DIN EN
DIN EN 10277-3
1999
German

Blankstahlerzeugnisse – Technische Lieferbedingungen Teil 3: Automatenstähle – Deutsche Fassung EN 10277-3 : 1999

1.1 Dieser Teil von EN 10277 gilt für blanke, gerade Stäbe aus Automatenstählen Im gezogenen, geschälten oder geschliffenen Zustand. 1.2 Diese EN 10277-3 wird vervollständigt durch EN 10277-1.
DIN EN
DIN EN 28746
1992
English

Grooved pins with round head (ISO 8746 : 1986) English version of DIN EN 28 746

This International Standard specifies the characteristics of round head grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metric dimensions and nominal diameter, d1, from 1,4 to 20 mm inclusive. The displaced material to each si […]
DIN
DIN 2095
1973
English

Helical Springs Made of Round Wire – Quality Specifications for Cold Coiled Compression Springs

This Standard applies to helical compression springs made of spring-hard round wire which, after cold coiling, are subjected only to tempering to relieve residual stresses. Cold coiled compression springs can be made with wire up to about 17 mm diameter. In the range from 10 to 17 mm wire […]