JIS B 1187

Hexagon head screws with captive washer

English 1995

0.000

Detailed Information

This Japanese Industrial Standard specifies steel and brass hexagon head screws with captive washer for general purposes. The hexagon head screw with captive washer is a hexagon head screw of which the threads are rolled after a washer has been assembled on the screw blank so as to prevent the disassembly of the washer from the screw.

Download File

(Log in to download spec.)

Check out other specifications

DIN EN

DIN EN 28746

1992

English

Grooved pins with round head (ISO 8746 : 1986) English version of DIN EN 28 746

This International Standard specifies the characteristics of round head grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metric dimensions and nominal diameter, d1, from 1,4 to 20 mm inclusive. The displaced material to each si […]

ASME

ASME B18.15

1995

English

FORGED EYE BOLTS

This standard is limited to dimensions and capacities for forged threaded eyebolts intended primarily for lifting applications, and covers the following types and styles. Type 1, Plain pattern (straight shank) (see Table 1) Style A, Long length Style B, Short length Type 2, Shoulder pat […]

DIN

DIN 7604

1992

English

Light-duty hexagon head screw plugs

This standard specifies dimensions and technical delivery conditions for screw plugs which are Intended to be screwed Into holes with parallel thread as specified in DIN 13 Part 5 and 6. Such plugs may be used together with seal rings as specified in DIN 7603, type and material of which a […]

ASTM

Abstract of ASTM F436M

1993

English

HARDENED STEEL WASHERS [METRIC]

1.1 This specification covers the chemical, mechanical, and dimensional requirements for metric hardened steel washers for use with fasteners having nominal thread diameters M12 through M100. These washers are intended for general purpose mechanical and structural use with bolts, nuts, st […]

DIN

DIN 1448-1

1970

English

Conical Shaft Ends – with External Thread – Dimensions

For connection with ISO Recommendation ISO/R 775-1969, see Explanations. Conical shaft ends are intended to take belt pulleys, couplings and gears. Sizes and details such as chamfer, centre bore and surface quality, which are not specified, are to be designed as appropriate.

5.01

DIN

DIN 86102

1965

English

Screwed Ends, Tapped Holes for Pipe Unions, Armatures and Plugs with Whitworth Pipe Thread – Design Sheet for Shipbuilding

This Standard contains a selection from DIN 3852 Sheet 2 for the shipbuilding industry with some diverging or complementary data.