MIL-DTL-1222J

STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED

English 2000
0.000
MIL
Detailed Information

This specification covers standard studs, hex cap screws, and heavy hex bolts in nominal standard diameters of 1/4 inch to 4 inches, nuts in nominal standard diameters of 1/4 inch to 3 inches, and socket head cap screws in nominal standard diameters of 1/4 inch to 1-1/2 inches for submarine safety and other applications where a high degree of reliability is required (see 6.1).

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 6799
1981
English

Lock washers (retaining washers) for shafts

Lockwashers within the context of this standard are retaining washers for the axial retention of components on shafts. They are inserted radially in grooves and enclose the groove base unde […]
DIN EN
DIN EN 22338
1992
English

Unhardened parallel pins (ISO 2338 : 1986) English version of DIN EN 22 338

This International Standard specifies the characteristics of unhardened parallel pins, with metric dimensions and nominal diameters, d, from 0,6 to 50 mm inclusive.
DIN
DIN 8188
1984
English

American type roller chains

This standard specifies dimensions and technical delivery conditions for American type roller chains which, together with their associated chain wheels, are predominantly used as power tran […]
ISO
ISO 8992
1986
English

Fasteners — General requirements for bolts, screws, studs and nuts

This International Standard specifies the general requirements for standardized bolts, screws, studs and nuts; it complements the International Standards on dimensional and tolerance requir […]
ISO
ISO 15071
1999
English

Hexagon bolts with flange — Small series — Product grade A

This International Standard specifies the characteristics of hexagon bolts with flange, small series, with product grade A, with threads from M5 up to and including M16 and property classes […]
JIS
JIS B 2804
2001
English

Retaining rings

This Japanese Industrial Standard specifies retaining rings, which are generally used on a shaft or in a bore, of the following shapes: a) C-type retaining ring, of which the shape is like […]
ASTM
ASTM A574M
1998
English

Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]

1.1 This specification covers the requirements for quenched and tempered alloy steel socket-head cap screws 1.6 mm through 48 mm in diameter having a minimum ultimate tensile strength of 1220 MPa.
NASM
NASM 16995
1998
English

SCREW, CAP, SOCKET HEAD-HEXAGON, CORROSION RESISTANT STEEL, UNC-3A

The minimum tensile strength in load pounds, indicated for each size in Table I, is based on 80.000 PSI minimum tensile strength. Load pounds are calculated by the stress areas indicated in […]
ASME
Abstract of ASME B1.13M
1995
English

METRIC SCREW THREADS – M PROFILE

This standard contains general metric standards for a 60 deg symmetrical screw thread with a basic ISO 68 profile designated M profile. The M profile threads of tolerance Class 6H/6g are in […]