NASM 16996

SCREW, CAP, SOCKET HEAD-HEXAGON, CORROSION RESISTANT STEEL, UNF-3A

English 1998

0.000

Detailed Information

CORROSION RESISTANT STEEL, TYPES 302 (UNS S30200), 303 (UNS S30300), 304 (UNS S30400), 302HQ (UNS S30430), 305 (UNS S30500), AND 316 (UNS S31600), IN ACCORDANCE WITH PROCUREMENT SPECIFICATION.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 1544

1975

English

Plat Steel Products – Cold Rolled Steel Strip – Dimensions, Permissible Variations on Dimensions and Form

1.1. This Standard applies to cold rolled flat products ≥ 0.10 ≤ 6 mm thick without surface coatings, and in particular to cold rolled strip in rolling widths ≤ 650 mm and bars cut from such strip in the steels quoted in Section 5.

DIN

DIN 964

1970

English

Slotted Raised Countersunk (Oval) Head Screws (Countersunk Heads according to ISO)

Intermediate lengths should as fer as possible be avoided. Lengths over 60 mm should be arranged in 10 mm steps. Normally these screws are manufactured in the sizes characterized by the quoted weight. If the screws are to be supplied with captive washer components, an addition is made t […]

DIN

DIN 7972

1970

English

Countersunk (Flat) Head Tapping Screws with Slot

Normally, these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data. Technical conditions of delivery and materiel according to DIN 267 Sheet 12.

JIS

JIS B 1122

1996

English

Cross recessed head tapping screws

This Japanese Industrial Standard specifies the steel cross recessed head tapping screws (hereafter, referred to as “steel tapping screws”) for general use.

DIN

DIN 7992

1970

English

T-head Bolts with Large Head

Technical conditions of delivery according to DIN 267

DIN

DIN 6908

1995

English

Conical spring washers for screw and washer assemblies

This standard specifies dimensions and technical delivery conditions for conical spring washers which are intended for use with screw and washer assemblies as specified in DIN 6900-5. They are designed for use with bolted connections with bolts of property classes 8.8 to 10.9 (as specifie […]