NASM 35206

SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM PLATED, UNC-2A

English 2004
0.000
NASM
Detailed Information

THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/2. ACCEPTABILITY OF SCREW THREADS SHALL BE IN
ACCORDANCE WITH FED-STD-H28/20, SYSTEM 21.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 7721-2
1990
English

Countersunk flat head screws – Part 2: Penetration depth of cross recesses

This part of ISO 7721 specifies the penetration depth of cross recesses of countersunk flat head screws for the two series 1 and 2 (deep and shallow, respectively).
JIS
JIS B 1015
2001
English

Hexalobular internal driving feature for bolts and screws

This Standard specifies the shape and basic dimensions of hexalobular internal driving feature for bolts and screws including the gauging method. The curvature of the contour of the hexalobula [...]
DIN
DIN 6340
1987
English

Washers for clamping devices

Washers for clamping devices as specified in DIN 6340 are designed to be used for clamps as specified in DIN 6314, DIN 6315 and DIN 6316. Their dimensions have thus been harmonized with the spe [...]
DIN
DIN 125-2
1990
English

Product grade A washers with a hardness from 300 HV designed for use with hexagon head bolts and nuts

This standard specifies requirements for product grade A washers with a hardness of 300 HV or more. The preferred application of these washers is in product grades A and B hexagon head bolt/hex [...]
ISO
ISO 7051
1983
English

Cross recessed raised countersunk (oval) head tapping screws

This International Standard specifies the characteristics of cross recessed raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
ISO
ISO 7042
2012
English

Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12

This International Standard specifies the characteristics of prevailing torque type all-metal hexagon high nuts, with threads from M5 up to and including M36, in product grade A for threads up [...]
DIN
DIN 7975
1970
English

Tapping Screws – Application and Core Hole Diameters

Set out below are some guidelines for the application of tapping screws. The fastening methods shown are to be deemed as examples. Tapping screws of Type B with cone end (also known as seekers [...]
DIN
DIN 963
1970
English

Slotted Countersunk (Flat) Head Screws (Countersunk Heads according to ISO)

Intermediate length should as for as possible be avoided. Lengths over 100 mm should be arranged in 10 mm steps. Normally these screws are manufactured in the sizes characterized by the quoted [...]
NASM
NASM 35206
2004
English

SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM PLATED, UNC-2A

THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/2. ACCEPTABILITY OF SCREW THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/20, SYSTEM 21.