NASM 35333

WASHER, LOCK, FLAT-INTERNAL TOOTH

English 2003
0.000
NASM
Detailed Information

MATERIAL: Carbon Steel, Grade 1050 to 1064. hardness 40 to 50 HRC or equivalent.
Corrosion-Resistant Steel, Composition 410.
Corrosion-resistant Steel, 300 series (UNS S300XX), hardness 35-43HRc.
Phosphor Bronze, Composition A in accordance with QQ-P-750.
Tin-brass, CDA Alloy 425 (UNS CA42500).

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 436
1990
English

Square washers for use in timber constructions

This standard specifies requirements for product grade C washers. The preferred application of these washers is in bolt/nut assemblies in timber constructions.
ISO
ISO 7436
1983
English

Slotted set screws with cup point

This International Standard specifies the characteristics of slotted set screws with cup Point and thread sizes from M 1,6 to M 12 inclusive and product grade A
ASTM
ASTM F788/F788M
1997
English

Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

1.1 This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of bolts, screws, and studs, including [...]
DIN
DIN 980
1987
English

All-metal prevailing torque type hexagon nuts

This standard specifies requirements for M3 to M39 prevailing torque type hexagon nuts (all-metal nuts), assigned to product grade A for sizes up to M16, and to product grade B for sizes over M16.
DIN
DIN 7981
1970
English

Pan Head Tapping Screws with Recessed Head

Bracketed nominal diameters should be avoided wherever possible. Normally these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes [...]
ASTM
Abstract of ASTM F1135
1999
English

CADMIUM OR ZINC CHROMATE ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS

1.1 This specification covers the basic performance requirements for an electrolytic or mechanical coating of cadmium or zinc followed by a chromate and baked organic coating for ferrous and no [...]
ASTM
ASTM F837
2008
English

Standard Specification for Stainless Steel Socket Head Cap Screws

1.1 This specification covers the chemical and mechanical requirements for stainless steel inch socket head cap screw (SHCS) with nominal thread 0.060 through 1.500 in. and intended for use in [...]
DIN
DIN 7
1981
English

Parallel pins

Parallel pins in accordance with this 5tandard are designed for the fastening of two or more individual elements. A friction type connection can be achieved by the selection of suitable fits If [...]
ISO
ISO 7040
2012
English

Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10

This International Standard specifies the characteristics of prevailing torque type hexagon regular nuts (with non-metallic insert), with threads from M3 up to and including M36, in product gra [...]