NASM 35649

NUT, PLAIN, HEXAGON, MACHINE SCREW UNC-2B

English 2002
0.000
NASM
Detailed Information

MATERIAL: STEEL, CARBON, SHALL BE IN ACCORDANCE WITH PROCUREMENT SPECIFICATION.
STEEL, CORROSION RESISTANT, SERIES 302 THRU 305 (UNS S30200 THRU UNS S30500),
AND TYPES 316 (UNS S31600), 317 (UNS S31700) AND 347 (UNS S34700), IN ACCORDANCE WITH PROCUREMENT SPECIFICATION.
BRASS, ALLOY 462 (UNS C46200) OR 464 (UNS C46400) IN ACCORDANCE WITH QQ-B-637 OR ALLOY 360 (UNS C36000), IN ACCORDANCE WITH QQ-B-626.
COPPER SILICON ALLOY, 651 (UNS C65100), IN ACCORDANCE WITH QQ-C-591.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 526
1973
English

Safety Cups for Cheese Head Screws according to DIN 84

Material: St 1303 according to DIN 1623 or St 3 according to DIN 1624 at manufacturer’s choice Finish: without burr
ASME
ASME B18.5.2.1M
1996
English

METRIC ROUND HEAD SHORT SQUARE NECK BOLTS

This standard covers the general and dimensional data for metric series round head short square neck bolts recognized as American National Standard and intended primarily for applications in th [...]
DIN EN
DIN EN 29692
1994
English

Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding – Joint preparation for steel (ISO 9692:1992) English version of DIN EN 29692

This International Standard pertains to types of joint preparation for metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding on steel (see clauses 3 and 4). [...]
ASTM
Abstract of ASTM F812/F812M
2002
English

SURFACE DISCONTINUITIES OF NUTS

1.1 This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of nuts with nominal diameters 1/4 in. [...]
DIN
DIN 1624
1987
English

Cold reduced mild unalloyed steel strip in widths not exceeding 650mm – Technical delivery conditions

1.1 This standard applies to cold reduced flat products (strip and lengths cut from it), without coating, in widths not exceeding 650 mm and thicknesses up to 6mm, made from mild unalloyed stee [...]
ISO
ISO 7089
1983
English

Plain washers – Normal series – Product grade A

This International Standard lays down the specification for plain washers of product grade A, preferable for hexagon bolts, screws and nuts of product grades A and B with normal width across fl [...]
JIS
JIS B 1044
2001
English

Fasteners—Electroplated coatings

This Standard specifies dimensional requirements for electroplated fasteners of steel or copper alloy. It specifies coating thicknesses and gives recommendations for hydrogen embrittlement reli [...]
ISO
ISO/R 2101
1971
English

ALUMINIUM AND ALUMINIUM ALLOYS – SHEAR TEST FOR RIVET WIRE AND RIVETS

This ISO Recommendation applies to the shear testing of aluminium and aluminium alloy rivet wire and rivets, having a diameter not greater than 10 mm (3/8 in).
ASTM
Abstract of ASTM A325M
1993
English

HIGH-STRENGTH BOLTS FOR STRUCTURAL STEEL JOINTS [METRIC]

1.1 This specification covers requirements of various types of quenched and tempered steel bolts in nominal thread diameters M16 to M36 inclusive, commonly known as "high-strength structural bo [...]