NASM 35650

NUT, PLAIN, HEXAGON, MACHINE SCREW, UNF-2B

English 2002

0.000

Detailed Information

MAGNETIC PERMEABILITY: CORROSION RESISTANT STEEL FASTENERS SHALL HAVE A MAGNETIC PERMEABILITY OF 2.00 MAXIMUM (AIR = 1.00) AT A FIELD STRENGTH OF H = 200 OERSTEDS USING A MAGNETIC INDICATOR IN ACCORDANCE WITH MIL-I-17214.

Download File

(Log in to download spec.)

Check out other specifications

JIS

JIS B 1054-2

2001

English

Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 2 : Nuts

This part of JIS B 1054 specifies the mechanical properties of nuts made of austenitic, martensitic and ferritic grades of corrosion- resistant stainless steels when tested over an ambient temperature range of 15 °C to 25 °C. Properties will vary at higher or lower temperatures.

DIN

DIN 7338

1993

English

Brake and clutch lining rivets

This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal rivets for use with brake and clutch linings as employed in automotive engineering.

ASTM

ASTM F912M

1997

English

Standard Specification for Alloy Steel Socket Set Screws [Metric]

1.1 This specification covers the requirements for quenched and tempered alloy steel socket set screws (SSS) M1.6 through M24 sizes having hardnesses 45 to 53 HRC, ISO 898/5 property class 45H.

ASTM

Abstract of ASTM F568M

1996

English

CARBON AND ALLOY STEEL EXTERNALLY THREADED METRIC FASTENERS

1.1 This specification covers chemical and mechanical requirements for nine property classes of carbon and alloy steel externally threaded metric fasteners in nominal thread diameters M1.6 through M100 suited for use in general engineering applications. 1.2 This specification does not cov […]

ASME

ASME Draft Revision B18.13.1M

1998

English

SCREW AND WASHER ASSEMBLIES – SEMS [METRIC SERIES]

This standard covers general and dimensional data pertinent to the various types of screw and captive washer assemblies, otherwise known as SEMS, which are recognized as American National Standards. (The word SEMS is a generic term applicable to screw and washer assemblies.)

DIN

DIN 1151

1973

English

Round plain head and countersunk head wire nails

Wire nails shall be made of steel (grade at manufacturer's discretion) and have a bright (bk), galvanized (zn) or metallized (me) finish.