NASM 51021

SETSCREW-HEXAGON SOCKET, CUP POINT, CORROSION-RESISTING STEEL, PASSIVATED, UNC-3A, PLAIN AND SELF-LOCKING

English 1998
0.000
NASM
Detailed Information

SELF-LOCKING ELEMENT:
(a) THE SELF-LOCKING ELEMENT SHALL BE IN ACCORDANCE WITH MIL-F-18240.
(b) FOR DESIGN AND USAGE LIMITATIONS, SEE MS15981.
(c) LOCATION OF EFFECTIVE LOCKING AREA SHALL BE IN ACCORDANCE WITH MS15981.
(d) MAXIMUM RING GAGE DIAMETER THAT LOCKING REGION OF SETSCREW MUST PASS THRU FREELY OR WITH FINGER PRESSURE SHALL BE THE NOMINAL SIZE PLUS 0.010.
(e) MIL-F-18240 DOESN’T ESTABLISH TORQUE REQUIREMENTS FOR LENGTHS ABOVE THE DASHED LINE. ONLY A POSITIVE INDICATION OF TORQUE IS REQUIRED.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 50961
2000
German

Galvanische Überzüge – Zinküberzüge auf Eisenwerkstoffen – Begriffe, Korrosionsprüfung und Korrosionsbeständigkeit

Diese Norm gilt nur in Verbindung mit DIN EN 12329, die Anforderungen an galvanisch abgeschiedene Zinküberzüge mit zusätzlicher Behandlung festlegt. In Ergänzung zu DIN EN 12329 legt diese Nor [...]
DIN EN
DIN EN 28744
1992
English

Full-length taper grooved pins (ISO 8744 : 1986) English version of DIN EN 28 744

This international Standard specifies the characteristics of full-length taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metr [...]
DIN
DIN 6796
1987
English

Conical spring washers for bolt/nut assemblies

Conical spring washers covered in this standard are deemed to be spring washers designed for use for bolt/nut assemblies involving bolts of property classes 8.8 to 10.9 as specified in ISO 898 [...]
SAE
SAE J429
2011
English

MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS

This SAE standard covers the mechanical and material requirements for inch-series steel bolts, screws. studs. screws for sems, and U-bolts used in automotive and related industries in sizes to [...]
IFI
IFI-125
2007
English

TEST PROCEDURE FOR THE PERFORMANCE OF ADHESIVE COATED PREVAILING-TORQUE SCREWS

This standard establishes a conformance test procedure for the performance of adhesive coated prevailing-torque screws, in nominal screw sizes No. 4 thru 3/4 in. Torque values given in this st [...]
DIN EN
DIN EN 24018
1992
English

Hexagon head screws – Product grade C (ISO 4018: 1988) English version of DIN EN 24 018

This International Standard gives specifications for hexagon head screws with threads from M5 up to and including M64, of product grade C.
DIN
DIN 188
1987
English

T-head bolts with double nib

This standard specifies M 8 to M 80 X 6 T-·head bolts with double nib. They are designed for use in attaching components to foundations or similar structures by means of T-slots, such as are sp [...]
JIS
JIS B 0261
2004
English

Parallel screw thread gauges— Measuring method of gauges

This Japanese Industrial Standard specifies measuring method of screw thread plug gauges and ring gauges (hereafter referred to as “thread gauges”) among limit gauges for parallel screw threads [...]
JIS
JIS B 0254
1985
English

Screw thread limit gauges for parallel pipe threads

This Japanese Industrial Standard specifies the limit gauges, hereinafter referred to as the "limit gauges for screw threads", to be used for dimensional inspection of parallel pipe threads (G) [...]