NASM 51958
SCREW, MACHINE PAN-HEAD, CROSS-RECESSED, CORROSION RESISTING STEEL, UNF-2A
English
1999
0.000
Detailed Information
MATERIAL: STEEL, CORROSION-RESISTING, 300 SERIES AS SPECIFIED IN QQ-S-763 AND FED-STD-66, COMPOSITION 304 OR 316 OR EQUAL TO OR INTERCHANGEABLE WITH 16:18 OR 18:8 CHROMIUM-NICKEL ALLOY STEEL
Download File
(Log in to download spec.)
Check out other specifications
2012
English
Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12
This International Standard specifies the characteristics of prevailing torque type all-metal hexagon high nuts, with threads from M5 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with property classes 5, 8, 10 and 12.
1993
English
Compression rivets
This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal compression rivets. Such rivets consist of two tubular parts, one of which is provided with a bore (rivet head) to receive the other (rivet body). In order to ensure proper assembly, b […]
1994
English
Curved spring lock washers
Spring lock washers as covered in this standard are deemed to be spring washers designed for use with bolt/nut assemblies involving fasteners of a property class less than 8.8, as specified in DIN EN 20898-1. They are intended to counteract the effect of setting which results In bolt/nut […]
1990
English
Screw and washer assemblies – Coarse threaded screws with captive serrated lock washer
This standard specifies requirements for screw and washer assemblies consisting of a M2,5 to M10 screw with flat bearing face, assigned to a property class below 5.8, and a captive serrated lock washer. Serrated lock washers are mainly designed to provide electric contact between componen […]
1970
English
Tapping Screws – Application and Core Hole Diameters
Set out below are some guidelines for the application of tapping screws. The fastening methods shown are to be deemed as examples. Tapping screws of Type B with cone end (also known as seekers) are the type predominantly used. This applies particularly when several sheets have to be fast […]
1996
English
CARBON AND ALLOY STEEL EXTERNALLY THREADED METRIC FASTENERS
1.1 This specification covers chemical and mechanical requirements for nine property classes of carbon and alloy steel externally threaded metric fasteners in nominal thread diameters M1.6 through M100 suited for use in general engineering applications. 1.2 This specification does not cov […]