SAE J121M

DECARBURIZATION IN HARDENED AND TEMPERED METRIC THREADED FASTENERS

English 1996
0.000
SAE
Detailed Information

This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 8765
1988
English

Hexagon head bolts with metric fine pitch thread – Product grades A and B

This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread diame [...]
ASTM
ASTM F2329
2005
English

ZINC COATING, HOT-DIP, REQUIREMENTS FOR APPLICATION TO CARBON AND ALLOY STEEL BOLTS, SCREWS, WASHERS, NUTS AND SPECIAL THREADED FASTENERS

1.1 This specification covers the requirements for hot-dip zinc coating applied to carbon steel and alloy steel bolts, screws, washers, nuts, and special threaded fasteners applied by the hot-d [...]
JIS
JIS B 1125
2003
English

Self drilling tapping screws

This Japanese Industrial Standard specifies self drilling tapping screws of steel made (hereafter referred to as “steel drilling tapping screws”) and those of martensitic stainless steel made ( [...]
DIN
DIN 7603
2001
English

Ring seals and gaskets

This standard specifies dimensions and materials for ring seals and flat or filled gaskets designed for use with compression couplings (e.g. as specified in DIN 3850 or DIN 7601) or pipe plugs [...]
DIN EN
DIN EN 10083-2
1991
English

Quenched and tempered steels – Technical delivery conditions for unalloyed quality steels – English version of DIN EN 10083 Part 2

1.1 This European Standard gives the technical delivery requirements for — semi-finished products, hot formed, e.g. blooms, billets, slabs (see notes 2 and 3), — bars (see note 2), — rod, — wid [...]
ASTM
ASTM A368
2009
English

Standard Specification for Stainless Steel Wire Strand

1.1 This specification covers stainless steel wire strand composed of a multiplicity of round wires and suitable for use as guy wires, overhead ground wires, and similar purposes. 1.2 The value [...]
DIN
DIN 50021
1988
English

Salt spray testing

This standard specifies the requirements which corrosion testing apparatuses and corrosive agents must meet in salt spray testing, the aim being to enable identical conditions to be reproduced [...]
DIN
DIN 961
1990
English

M8 x 1 to M52 x 3 hexagon head bolts with fine pitch thread – Product grades A and B

This standard specifies requirements for M8 to M52 hexagon head bolts threaded up to the head. with metric fine pitch thread, assigned to product grade A for sizes up to M24 and lengths not exc [...]
ANSI ASME
ANSI/ASME B18.6.3
1998
English

SQUARE AND HEX MACHINE SCREW NUTS

1. ANSI/ASME B18.6.3 is a standard developed through the procedures of The American Society of Mechanical Engineers. B18.6.3 is under the jurisdiction of ASME Standards Committee B18 and is the [...]