SAE USCAR-1

SALT SPRAY TESTING AND EVALUATION OF FASTENER FINISHES

English 2005
0.000
SAE
Detailed Information

This procedure is used to test and evaluate the resistance of fastener surface finishes to laboratory salt spray testing.

Download File
(Log in to download spec.)

Check out other specifications

ASME
ABSTRACT OF ASME B1.3
2007
English

SCREW THREAD GAGING SYSTEMS FOR ACCEPTABILITY: INCH AND METRIC SCREW THREADS (UN, UNR, UNJ, M, AND MJ)

(a) This Standard presents screw thread gaging systems suitable for determining the acceptability of inch UN, UNR, and UNJ screw threads on externally and internally threaded products. It estab [...]
ANSI
ANSI B18.2.3.3M
1995
English

METRIC HEAVY HEX SCREWS

1.1 This standard covers the complete general and dimensional data for metric heavy hex screws recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard i [...]
DIN
DIN 71511
1975
English

Gaskets for Oval Flanges

Gaskets according to this Standard are intended for oval flanges according to DIN 71501.
ASTM
Abstract of ASTM F788/F788M
2008
English

SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUDS

This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of bolt, screws, and studs, including heat- [...]
DIN
DIN 6921
1983
English

Hexagon flange bolts

This standard specifies product grade A hexagon flange bolts with metric coarse screw thread or metric fine screw thread from 5 up to and including 20 mm nominal thread diameter. If, in special [...]
DIN
DIN 125-1
1990
English

Product grade A washers with a hardness up to 250 HV designed for use with hexagon head bolts and nuts

This standard specifies requirements for product grade A washers with a hardness up to 250 HV, designed for use with bolts of properly class 8.8 or less. The preferred application of these wash [...]