DIN ISO 13715

Technical drawings – Edges of undefined shape – Vocabulary and indications

English 2000
0.000
DIN ISO
Detailed Information

This International Standard defines the terms defining the states of edges and specifies rules for representing states of edges of undefined shape in technical drawings.

The proportions and dimensions of the graphical symbols to be used are also specified.

In cases where the geometrically defined shape of an edge (1 x 45°, for example) is required, the general dimensioning principles given in ISO 129-1 apply.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 9021
1990
English

Large size washers

This standard specifies requirements for product grades A and C washers with a large outside diameter, i.e. washers with an outside diameter approximately equal to three times the nominal threa [...]
DIN
DIN 7516
1995
English

Cross recessed head thread cutting screws – Dimensions, requirements and testing

This standard specifies dimensions, requirements and test methods for heat-treated cross recessed head thread cutting screws with an ISO metric thread as specified in DIN 13-12, with cutting fl [...]
Others
NF E 25-511
1984
French

RONDELLES CONIQUES STRIÉES DE SERRAGE Symbole CS

La présente norme fixe les caractéristiques des rondelles coniques striées de serrage en acier au carbone, et définit les essais à effectuer pour leur contrôle. Elles sont généralement utilis [...]
DIN
DIN 964
1970
English

Slotted Raised Countersunk (Oval) Head Screws (Countersunk Heads according to ISO)

Intermediate lengths should as fer as possible be avoided. Lengths over 60 mm should be arranged in 10 mm steps. Normally these screws are manufactured in the sizes characterized by the quote [...]
DIN
DIN 6905
1990
English

Spring lock washers for screw and washer assemblies

Spring lock washers as specified in this standard are intended for use with screw and washer assemblies as specified in DIN 6900 Part 3. They are designed for use with bolted connections with b [...]
ASTM
Abstract of ASTM F880M
1990
English

STAINLESS STEEL SOCKET SET SCREWS [METRIC]

1.1 This specification covers the requirements for austenitic grade stainless steel socket set screws (SSS), sizes M1.6 through M24, having Property Classes A1·50 and A1·70. NOTE 1 - This speci [...]
DIN
DIN 7980
1972
German

Federringe für Zylindcrschrauhcn

Die Oberfläche der Federringe muß glatt und frei von Zunder und Grat sein. Die Federringe müssen ohne Knicke gewunden und ihre äußeren Kanten scharfkantig bis leicht gerundet sein.
BS EN
BS EN 14399-3
2015
English

High-strength structural bolting assemblies for preloading Part 3: System HR — Hexagon bolt and nut assemblies

This European Standard specifies, together with EN 14399-1 and EN 14399-2, the requirements for assemblies of high-strength structural bolts and nuts of system HR suitable for preloaded joints [...]
DIN
DIN 7339
1993
English

One-piece tubular rivets drawn from strip

This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal one-piece tubular rivets drawn from strip.