DIN EN 27436

Slotted set screws with cup point (ISO 7436 : 1983) English version of DIN EN 27 436

English 1992
0.000
DIN EN
Detailed Information

This International Standard specifies the characteristics of slotted set screws with cup point and thread sizes from M 1,6 to M 12 inclusive and product grade A.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 6916
1989
English

Round washers for high-strength structural steel bolting

The washers specified in this standard are intended for use in GV and SL structural steel bolting in accordance with DIN 18 800 Part 1, together with DIN 6914 bolts and DIN 6915 hexagon nuts.
ASTM
ASTM F2280
2008
English

“TWIST OFF” TYPE TENSION CONTROL STRUCTURAL BOLT/NUT/WASHER ASSEMBLIES, STEEL, HEAT TREATED, 150 KSI MINUMUM TENSILE STRENGTH

1.1 This specification covers two types of heat treated, steel, tension control bolt-nut-washer assemblies, also referred to as "sets," having a tensile strength of 150 to 173 ksi. These assemblies are capable of developing a minimum predetermined tension when installed by applying torque to the ...
DIN
DIN 1448-1
1970
English

Conical Shaft Ends – with External Thread – Dimensions

For connection with ISO Recommendation ISO/R 775-1969, see Explanations. Conical shaft ends are intended to take belt pulleys, couplings and gears. Sizes and details such as chamfer, centre bore and surface quality, which are not specified, are to be designed as appropriate.
5.01
ASTM
Abstract of ASTM F1136
1998
English

CHROMIUM/ZINC CORROSION PROTECTIVE COATINGS FOR FASTENERS

1.1 This specification covers the basic requirements for three grades of chromium/zinc inorganic coatings for threaded fasteners. 1.2 These coatings are applied by conventional dip-spin or dip-drain methods. 1.3 The coating process does not induce hydrogen embrittlement, providing that the fasten...
DIN
DIN 7983
1990
English

Cross recessed raised countersunk head tapping screws

DIN 7504 shall apply with regard to tapping screws with drilling tip (self-drilling screws). The DIN 4000 - 2 - 1 tabular layout of article characteristics shall apply for screws as covered in this standard.
ASTM
Abstract of ASTM B766
1998
English

ELECTRODEPOSITED COATINGS OF CADMIUM

1.1 This specification covers the requirements for electrode posited cadmium coatings on products of iron, steel, and other metals. NOTE 1 - Cadmium is deposited as a coating principally on iron and steel products. It can also be electrodeposited on aluminum, brass, beryllium copper, copper, nick...