SAE J493

Rod Ends and Clevis Pins

English 1961
0.000
SAE
Detailed Information

The following publications form a part of the specification to the extend specified herein. Unless otherwise indicated the latest revision of SAE publications shall apply.

SAE J1010-Emission Control Hose
SAE J1111-Component Nomenclature-Skidder-Grapple

Download File
(Log in to download spec.)

Check out other specifications

NASM
NASM 35307
1999
English

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A

MECHANICAL PROPERTIES: The minimum tensile strength in load pounds, indicated in Table I is based on 80,000 PSI Minimum Tensile Strength for diameters through .625 inch and 70,000 PSI Minimum T [...]
BS EN
BS EN 10025-3
2004
English

Hot rolled products of structural steels — Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

Part 3 of this document, in addition to part 1, specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the normalized/normalized rolled deliver [...]
DIN
DIN 46241-2
1963
English

Telecommunications Engineering – Contact Rivets – Soldered or Welded – Technical Conditions of Delivery

These conditions of delivery apply to contact rivets according to DIN 46240 Sheet 2 with soldered-on or welded-on tip (at manufacturer's option) in contact materials which are not capable of be [...]
Others
MPIF 35
2016
English

Materials Standards for Metal Injection Molded Parts

MPIF Standard 35 is issued to provide the design and materials engineer with the information necessary for specifying powder metal (PM) materials that have been developed by the PM parts manufa [...]
DIN
DIN 7500-2
1984
English

Thread rolling screws for ISO metric thread – Guideline values for hole diameters

This standard specifies hole diameters for thread rolling screws conforming to DIN 7500 Part 1. These hole diameters are the result of tests carried out by manufacturers and users. The values g [...]
Custom
General Motors | GM4298P
1997
English

SALT SPRAY TEST

This standard covers the requirements necessary to attain the conditions found in a neutral salt spray test cabinet. 1.1 The chamber operation is based on ASTM B117 with the following clarifica [...]
DIN
DIN 555
1972
English

Hexagon Nuts Metric Thread Type g

Tho dimensions of the hexagon nuts according to this Standard correspond with those indicated in the ISO Recommendation ISO/R 272-1968 published by the International Organization for Standardiz [...]
DIN
DIN 610
1971
German

Sechskant-Paßschrauben mit kurzem Gewindezapfen

Bezeichnung einer Sechskant-Paßschraube mit Gewinde d1 = M20, Länge l = 80 mm und Festigkeitsklasse 5.6: Paßschraube M20 x 80 DIN 610 - 5.6 Bezeichnung einer Sechskant-Paßschraube mit Gewinde d [...]
ISO
ISO 7719
1983
English

Prevailing torque type all-metal hexagon nuts, style 1 – Property classes 5, 8 and 10

This International Standard specifies the characteristics of prevailing torque type all-metal hexagon nuts with thread sizes from M 5 to M 36 inclusive, in property classes 5, 8 and 10, and pro [...]