Abstract of ANSI/ASME B1.16M

GAGES AND GAGING FOR METRIC M SCREW THREADS

English 1992
0.000
ANSI ASME
Detailed Information

This standard provides essential specifications and dimensions for the gages used on M series metric screw threads, and covers the specifications and dimensions for the thread gages and measuring equipment listed in Tables 1 and 2.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 558
1967
English

Hexagon Screws – Thread Approximately to Head – Metric Thread Type g

These screws are normally made in the sizes for which weight data are indicated. Sizes for which the weight data are emphasized by bold type are generally stocked commercially because they are [...]
DIN
DIN 923
1986
English

Slotted pan head screws with shoulder

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN [...]
DIN
DIN 188
1987
English

T-head bolts with double nib

This standard specifies M 8 to M 80 X 6 T-·head bolts with double nib. They are designed for use in attaching components to foundations or similar structures by means of T-slots, such as are sp [...]
DIN
DIN 7968
1999
English

Steel hexagon fit bolts for structural steel bolting, for supply with hexagon nuts

This standard specifies dimensions and technical delivery conditions for M12 to M30 steel hexagon fit bolts of product grade C for use in structural steel bolting. It also specifies the nuts an [...]
DIN
DIN 6904
1990
English

Curved spring washers for screw and washer assemblies

Curved spring washers as specified in this standard are intended for use with screw and washer assemblies as specified in DIN 6900 Part 2. They are designed for use with bolted connections with [...]
ISO
ISO 898-5
1980
English

Mechanical properties of fasteners – Part 5 : Set screws and similar threaded fasteners not under tensile stresses

This International Standard specifies the mechanical properties of set screws and similar fasteners not under tensile stresses in the range from 1,6 up to and including 39 mm thread diameter wh [...]
ISO
ISO 3269
2000
English

Fasteners — Acceptance inspection

1.1 This International Standard specifies the acceptance inspection procedure that the purchaser of fasteners must follow in order to determine whether a lot of fasteners will be accepted or re [...]
DIN EN
DIN EN 28765
1992
English

Hexagon head bolts with metric fine pitch thread – Product grades A and B (ISO 8765 : 1988) English version of DIN EN 28 765

This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread diame [...]
DIN
DIN 6791
1993
English

Semitubular pan head rivets with nominal diameters from 1,6 to 10 mm

This standard specifies dimensions of steel and nonferrous metal semitubular pan head rivets with nominal diameters from 1,6 to 10 mm.