ANSI/ASME B18.1.3M

METRIC SMALL SOLID RIVETS

English 1995
0.000
ANSI ASME
Detailed Information

1.1.1 This standard covers complete general and dimensional data for those types of metric small solid rivets recognized as American Nalional Standard. Included is an appendix covering formulas on which dimensional data are based. It should be understood, however, that where questions arise concerning acceptance of a product, the dimensions in the tables shall govern over recalculation by formula.
1.1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the products described are stock production sizes. Consumers should consult with manufacturers concerning the availability of products. For recommended diameter-length combinations, refer to Table 7.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 6900-5
1990
English

Screw and washer assemblies – Coarse threaded screws with captive conical spring washer

This standard specifies requirements for screw and washer assemblies consisting of an M2,5 to M 12 screw with flat bearing face, assigned to property classes 8.8 up to and including 10.9, and a [...]
ANSI
ANSI B18.2.4.4M
1993
English

METRIC HEX FLANGE NUTS

1.1 This standard covers the complete general and dimensional data for metric hex flange nuts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is [...]
DIN
DIN 912
1983
English

Hexagon socket head cap screws (modified version of ISO 4762)

This standard specifies product grade A hexagon socket head cap screws with metric screw threads and thread diameters from 1,4 to 100 mm. If, in exceptional cases, the screws are to meet requir [...]
JIS
JIS B 1086
1998
English

Widening test on nuts

This Standard specifies the test procedure for evaluating the acceptability of surface discontinuities designated in JIS B 1042 excluding nuts made of free cutting steel. It applies to nuts wi [...]
DIN
DIN 6901
1990
English

Tapping screw and washer assemblies

This standard specifies requirements for screw and washer assemblies consisting of a tapping screw with f!at bearing face and a DIN 6903 captive washer
ASTM
ASTM A574
2008
English

ALLOY STEEL SOCKET-HEAD CAP SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket-head cap screws, 0.060 through 4 in. in diameter where high strength is required. 1.2 The va [...]
DIN EN
DIN EN 28750
1992
English

Coiled, standard duty spring-type straight pins (ISO 8750 : 1987) English version of DIN EN 28 750

This International Standard specifies the characteristics of standard duty coiled spring-type straight pins with metric dimensions and nominal diameters, d1, from 0,8 to 20 mm inclusive.
ISO
ISO 7380-2
2011
English

Button head screws — Part 2: Hexagon socket button head screws with collar

This International Standard specifies the characteristics of hexagon socket button head screws with collar with threads from M3 up to and including M16, with product grade A and with reduced lo [...]
ISO
ISO 1302
2002
English

Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation

This International Standard specifies the rules for the indication of surface texture in technical product documentation (e.g. drawings, specifications, contracts, reports) by means of graphica [...]