DIN 7

Parallel pins

English 1981
0.000
DIN
Detailed Information

Parallel pins in accordance with this 5tandard are designed for the fastening of two or more individual elements. A friction type connection can be achieved by the selection of suitable fits If such a connection is meant to be disconnected repeatedly, then it becomes preferable to use taper pins in accordance with DIN 1.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 20898-1
1992
English

Mechanical properties of fasteners – Bolts, screws and studs (ISO 898-1 : 1988) English version of DIN EN 20 898 Part 1

This part of ISO 898 specifies the mechanical properties of bolts, screws and studs when tested at room temperature (see ISO 1) . Properties will vary at higher and lower temperature.
JIS
JIS B 0205-2
2001
English

ISO general purpose metric screw threads — Part 2: General plan

This Standard specifies ISO general purpose metric screw threads (M) having basic profile according to JIS B 0205-1. Basic dimensions are given in JIS B 0205- 4. For tolerances see JIS B 0209-1.
DIN
DIN 6916
1989
English

Round washers for high-strength structural steel bolting

The washers specified in this standard are intended for use in GV and SL structural steel bolting in accordance with DIN 18 800 Part 1, together with DIN 6914 bolts and DIN 6915 hexagon nuts.
ASME
ASME Draft B18.2.7.1M
1999
English

METRIC 12-SPLlNE FLANGE SCREWS

1.1 This standard covers the complete general and dimensional data for metric 12-spline flange screws recognized as American National Standard. 1.2 The inclusion of dimensional data in this sta [...]
DIN
DIN 1479
1998
English

Hexagon turnbuckles

This standard specifies dimensions and technical delivery conditions for sizes M6 to M30 hexagon turnbuckles with widths across flats as in ISO 272, of product grade A and made of steel or aust [...]
DIN
DIN 315
1983
English

Wing nuts

The following amendments have been made in comparison with the December 1972 edition: a) The dimensions of the wing nuts have been altered in some respects. b) Limiting sizes have been adopted. [...]
DIN
DIN 6340
1987
English

Washers for clamping devices

Washers for clamping devices as specified in DIN 6340 are designed to be used for clamps as specified in DIN 6314, DIN 6315 and DIN 6316. Their dimensions have thus been harmonized with the spe [...]
ISO
ISO 3800
1993
English

Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results

This International Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners, as well as recommendations for the evaluation of the results. Unless other [...]
JIS
JIS B 0261
2004
English

Parallel screw thread gauges— Measuring method of gauges

This Japanese Industrial Standard specifies measuring method of screw thread plug gauges and ring gauges (hereafter referred to as “thread gauges”) among limit gauges for parallel screw threads [...]