DIN 78
Bolt end protrusions
English
2001
0.000
Detailed Information
This standard specifies minimum bolt end protrusions for general purpose assemblies of bolts, screws, studs and similar fasteners with ISO metric screw thread (coarse pitch thread) as in DIN 13-1 and DIN ISO 261, and hexagon nuts.
Download File
(Log in to download spec.)
Check out other specifications
1983
English
Plain washers for metric bolts, screws and nuts – General plan
This International Standard lays down the specification for the full range of plain washers of product grades A and C for bolts, screws and nuts with thread sizes from M 1 to M 150 inclusive. This International Standard does not apply to washers for preassembled bolts and screws as far a […]
2002
English
WASHER, LOCK-SPRING, HELICAL, REGULAR (MEDIUM) SERIES
a. CARBON STEEL WASHERS SHALL HAVE A HARDNESS OF 38 TO 46HRC. b. CORROSION-RESISTANT STEEL WASHERS TYPE 420 (UNS S42000) SHALL HAVE A HARDNESS OF 45-53 HRC, AND TYPE 300 (UNS S3XXXX) SERIES WASHERS SHALL HAVE A HARDNESS OF 35-43-HRC. c. PHOSPHOR BRONZE AND TIN-BRASS WASHERS SHALL HAVE A M […]
1983
English
Fasteners – Technical delivery conditions – Property classes for nuts (previous classes)
DIN 267 Part 4 was converted to the international property classes for nuts in 1967. The previous symbols 4D, 5D, 5S, 6G, 6S and 8G were replaced by code numbers 4, 5, 6, 8, 10, 12 and 14 where the code number indicated 1/100 of the minimum tensile strength of the bolt with which the nut […]
1995
English
Slotted head wood screws
This Japanese Industrial Standard specifies the slotted head wood screws (hereafter referred to as "wood screws") made of steel, stainless steel and brass for general use.
1987
English
Stress area and bearing area for threaded fasteners
This Japanese Industrial Standard specifies the stress area of metric screw thread and the area of the part where a load due to the contact of the bearing surface of threaded fastener and the other side is added, hereinafter referred to as the ”load area”. Furthermore, the method to obta […]
2006
German
Vergütungsstähle – Teil 1: Allgemeine technische Lieferbedingungen; Deutsche Fassung EN 10083-1:2006
Dieser Teil der EN 10083 enthält die allgemeinen technischen Lieferbedingungen für ⎯ Halbzeug, warmgeformt, zum Beispiel Vorblöcke, Knüppel, Vorbrammen (siehe Anmerkungen 2 und 3), ⎯ Stabstahl (siehe Anmerkung 2), ⎯ Walzdraht, ⎯ Breitflachstahl, ⎯ warmgewalztes Blech und Band, ⎯ Schmiedes […]