DIN 94
Split pins
English
1983
0.000
Detailed Information
In its October 1972 edition, DIN 94 was aligned with International Recommendation ISO/R 1234 – 1971. This Recommendation was converted into an International Standard in 1976, without any technical changes being made to the previous specifications.

Download File
(Log in to download spec.)
Check out other specifications
2007
English
TEST PROCEDURE FOR THE PERFORMANCE OF NUTS WITH PRE-APPLIED ADHESIVE COATED THREADS – INCH SERIES
This standard establishes a conformance test procedure for the performance of pre-applied adhesive coatings applied to inch series nuts, in nominal sizes 1/4 thru 1 inch intended for application temperatures of - 40°F to 350°F. Torque values for performance level I and level ll given in this sta...
2001
English
NOMENCLATURE, DEFINITIONS, AND LETTER SYMBOLS FOR SCREW THREADS
1. ANSI/ASME B1.7M is a standard developed through the procedures of The American Society of Mechanical Engineers. B1.7M is under the jurisdiction of ASME Standards Committee B1. 2. B1.7M establishes uniform practices for standard screw threads with regard to screw thread nomenclature and letter ...
1989
English
Square taper washers for high-strength structural bolting of steel I sections
Washers as specified in this standard are intended for use in GV and SL structural bolting of steel I sections in accordance with DIN 18 800 Part 1, together with DIN 6914 screws and DIN 6915 nuts.
1998
English
Parallel pins, of unhardened steel and austenitic stainless steel
This International Standard specifies the characteristics of parallel pins of unhardened steel and austenitic stainless steel, with nominal diameters d from 0,6 mm to 50 mm inclusive.
1999
English
Designation system for screw threads
This Japanese Industrial Standard specifies designation for screw threads used in the Standards referring the principle of screw thread and the Standards referring the products having screw thread.
1971
German
Sechskant-Paßschrauben mit kurzem Gewindezapfen
Bezeichnung einer Sechskant-Paßschraube mit Gewinde d1 = M20, Länge l = 80 mm und Festigkeitsklasse 5.6: Paßschraube M20 x 80 DIN 610 - 5.6 Bezeichnung einer Sechskant-Paßschraube mit Gewinde d1 = M20 X 1,5, Schaftdurchmesser d3 = 21,3 mm, Länge l = 80 mm und Festigkeitsklasse 5.6: Paßschraube M2...