DIN 432

External tab washers (Locking tab washers)

English 1983
0.000
DIN
Detailed Information

This standard specifies requirements for external tab washers (previously known as locking tab washers), which are used in threaded fastenings. They are intended to prevent the fastening loosening off. The washer’s effectiveness depends on the design conditions of the particular case and on the loading of the fastening.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 268
1974
English

Tangential Keys and Tangential Keyways for Alternating Shock Loads

The present Standard corresponds in substance to the ISO Draft ISO/DIS 3117-1973 Tangential keying While it is true that this ISO Draft deals only with tangential keys and keyways for constant [...]
ASME
ASME B18.6.8
2010
English

THUMB SCREWS AND WING SCREWS (INCH SERIES)

This Standard covers the general and dimensional data for the various types of thumb screws and wing screws recognized as standard.
ASTM
ASTM A194/A194M
2010
English

Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

1.1 This specification covers a variety of carbon, alloy, and martensitic stainless steel nuts in the size range 1⁄4 through 4 in. and metric M6 through M100 nominal. It also covers austenitic [...]
ASME
ASME B18.8.2
2005
English

TAPER PINS, DOWEL PINS, STRAIGHT PINS, GROOVED PINS AND SPRING PINS (INCH SERIES)

This standard is intended to cover the complete dimensional and general data for taper pins, recognized as “American National Standard," which are widely used in general industrial applications [...]
ISO
ISO 14584
2001
English

Hexalobular socket raised countersunk head screws

This International Standard specifies the characteristics of hexalobular socket raised countersunk head screws in product grades A and with thread sizes from M2 to M10 inclusive.
ASTM
ASTM F436
2010
English

HARDENED STEEL WASHERS

This specification covers the chemical, mechanical, and dimensional requirements for hardened steel washers for use with fasteners having nominal thread diameters of 1/4 through 4 in. These was [...]
SAE
SAE J995
2011
English

MECHANICAL AND MATERIAL REQUIREMENTS FOR STEEL NUTS

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes 1/4 to 1-1/2 in., [...]
DIN
DIN 965
1990
English

Cross recessed countersunk flat head screws

This standard specifies requirements for M 1,6 to M 10 cross recessed countersunk head screws assigned to product grade A. See DIN 962 (or the standards referred to therein) for special screw t [...]
MIL
MIL-DTL-18240F
1997
English

FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250°F MAXIMUM

This specification defines the requirements for self-locking elements for use in externally threaded fasteners such as bolts and screws to be used in fasteners with either UNC, UNJC, UNF, UNJF, [...]