JIS B 1183
Domed cap nuts
English
2001
0.000
Detailed Information
This Japanese Industrial Standard specifies the steel domed cap nuts (hereafter referred to as “steel nuts”) , the stainless steel domed cap nuts (hereafter referred to as “stainless steel nuts”) , and the brass domed cap nuts (hereafter referred to as “brass nuts”), all for general use.
Download File
(Log in to download spec.)
Check out other specifications
1973
English
Limits of sizes and tolerances for unified fine screw threads
This Japanese Industrial Standard specifies limits of sizes and tolerances for unified fine screw threads specified in JIS B 0208-Unified Fine Screw Threads, mainly used for the purpose of fastening.
1983
English
Hexagon nuts with flange
This standard gives specifications for hexagon nuts with flange, with metric coarse or fine thread with diameters from 5 to 20 mm, assigned to product grade A. If, in special cases, nuts are to comply with specifications other than those given in this standard, e.g. regarding property classes, th...
1995
English
Stainless steels – Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes
1.1 This part of EN 10088 specifies the technical delivery conditions for semi-finished products, hot or cold formed bars, rods and sections of standard grades and special grades of stainless steels for general purposes. NOTE: Here and in the following are understood - under the term "general pur...
1991
English
Break mandrel blind rivets
This standard specifies dimensions of, and requirements regarding material, design, strength and finish, as well as the relevant methods of test for, blind rivets of the self -plugging type. Such rivets consist of a rivet body and an integral mandrel, which breaks off on setting ('break mandrel',...
2008
English
Metallic coatings – Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
This standard applies for electrodeposited and Cr(VI)-free passivated zinc coatings and zinc alloy coatings on iron materials. The zinc alloy coatings contain nickel or iron (zinc/nickel, zinc/iron) as alloy components. The main purpose in the application of the coatings or coating systems is to...
1989
English
Inspection method for taper screw gauges
This Japanese Industrial Standard specifies the inspection method of taper screw gauges for pipes specified in JIS B 0253 (hereafter referred to as the "taper screw gauges"). Furthermore, the inspection method for the taper screw gauges specified in Appendix of JIS B 0253 is specified in Appendix.