DIN 74361-2

Scheibenräder für Kraftwagen und Anhängefahrzeuge – Teil 2: Befestigungselemente für Bolzenzentrierung

German 2008
0.000
DIN
Detailed Information

Diese Norm gilt für Befestigungselemente von bolzenzentrierten Scheibenrädern aller Art an Kraftwagen und Anhängefahrzeugen.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 27436
1992
English

Slotted set screws with cup point (ISO 7436 : 1983) English version of DIN EN 27 436

This International Standard specifies the characteristics of slotted set screws with cup point and thread sizes from M 1,6 to M 12 inclusive and product grade A.
BS EN
BS EN 10025-4
2004
English

Hot rolled products of structural steels — Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels

Part 4 of this document, in addition to Part 1, specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the thermomechanical rolled condition in the grades and qualities given in Tables 2 to 4 (chemical composition) and Tables 5 to 7 (mechanical pr...
DIN
DIN 74361-2
2008
German

Scheibenräder für Kraftwagen und Anhängefahrzeuge – Teil 2: Befestigungselemente für Bolzenzentrierung

Diese Norm gilt für Befestigungselemente von bolzenzentrierten Scheibenrädern aller Art an Kraftwagen und Anhängefahrzeugen.
DIN
DIN 1152
1973
English

Round lost head wire nails

Wire nails shall be made of steel (grade at manufacturer’s discretion) and have a bright (bk) or galvanized (zn) finish.
DIN
DIN 7983
1990
English

Cross recessed raised countersunk head tapping screws

DIN 7504 shall apply with regard to tapping screws with drilling tip (self-drilling screws). The DIN 4000 - 2 - 1 tabular layout of article characteristics shall apply for screws as covered in this standard.
DIN
DIN 80705
1990
English

Thin nuts with coarse pitch and fine pitch thread and with small widths across flats

This standard specifies requirements for thin nuts with small widths across flats and ISO metric screw thread as specified in the DIN 13 series, assigned to product grades B and C. If, in special cases, nuts are to comply with specifications other than those given in this standard (e.g. regarding...