DIN 478

Square head bolts with collar

English 1985
0.000
DIN
Detailed Information

This standard specifies product grade A square head bolts with collar and M 5 to M 24 coarse thread.
Where, for special purposes, the bolts are to meet requirements differing from those specified in the present standard, e. g. in respect of nominal length or property class, the specifications of the relevant standards shall be complied with.

Download File
(Log in to download spec.)

Check out other specifications

SAE
SAE USCAR-1
2005
English

SALT SPRAY TESTING AND EVALUATION OF FASTENER FINISHES

This procedure is used to test and evaluate the resistance of fastener surface finishes to laboratory salt spray testing.
ISO
ISO 3506-1
2009
English

Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs

This part of ISO 3506 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when test [...]
DIN
DIN 966
1984
English

Cross recessed raised countersunk (oval) head screws

If raised countersunk oval head screws with length tabled below the stepped line are to be supplied threaded up to the head, i.e. deviating from the standard design, the letter A shall be incor [...]
DIN
DIN 268
1974
English

Tangential Keys and Tangential Keyways for Alternating Shock Loads

The present Standard corresponds in substance to the ISO Draft ISO/DIS 3117-1973 Tangential keying While it is true that this ISO Draft deals only with tangential keys and keyways for constant [...]
ASME
ABSTRACT OF ASME B1.2
2007
English

GAGES AND GAGING FOR UNIFIED INCH SCREW THREADS

This standard provides essential specifications and dimensions for the gages used on Unified inch screw threads (UN and UNR thread form), and covers the specifications and dimensions for the th [...]
IFI
IFI-135
2008
English

MECHANICAL TESTING OF BLIND RIVETS

1.1 Scope. This standard describes procedures for the mechanical testing of inch series blind rivets to determine properties required in the product standard. 1.2 The following tests are descri [...]
ASTM
Abstract of ASTM A563M
1996
English

CARBON AND ALLOY STEEL METRIC NUTS

This specification covers chemical and mechanical requirements for eight property classes of hex and hex flange carbon and alloy steel nuts for general structural and mechanical uses on bolts, [...]
DIN EN
DIN EN 24016
1992
English

Hexagon head bolts – Product grade C (ISO 4016 :1988) English version of DIN EN 24 016

This International Standard gives specifications for hexagon head bolts with threads from M5 up to and including M64 of product grade C. If, in special cases, specifications other than those l [...]
DIN
Beiblatt 1 zu DIN 267 Teil 2
1984
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Ausführung und Maßgenauigkeit – Beispiele für Toleranzangaben

In den nachfolgenden Bildtafeln sind - nach den Produktklassen A, B und C (bisher Ausführungen m, mg und g) geordnet - die aus DIN ISO 4759 Teil 1 und den bisherigen Festlegungen in DIN 267 Tei [...]