General Motors | GM4298P

SALT SPRAY TEST

English 1997

0.000

Detailed Information

This standard covers the requirements necessary to attain the conditions found in a neutral salt spray test cabinet.
1.1 The chamber operation is based on ASTM B117 with the following clarifications.
1.2 The salt spray test is better suited for quality control and process control evaluations. Other tests may be better suited to simulate field performance.

Download File

(Log in to download spec.)

Check out other specifications

IFI

IFI-301

2008

English

GAGE CALIBRATION REQUIREMENTS AND PROCEDURES FOR THREAD GAGES

All UN, UNJ, M, and MJ thread form gages shall be calibrated using the commonly accepted metrology techniques described in this standard using properly maintained standard metrology equipment. [...]

JIS

JIS B 1007

2003

English

Tapping screws thread

This Japanese Industrial Standard specifies the type and dimensions of the thread and thread ends for tapping screws with thread sizes from ST1.5 to ST9.5 inclusive.

ISO

ISO 10664

2005

English

Hexalobular internal driving feature for bolts and screws

This International Standard specifies the shape and basic dimensions of the hexalobular internal driving feature for bolts and screws, including the gauging method. The curvature of the contou [...]

DIN

DIN 7995

1984

English

Cross recessed raised countersunk head wood screws

In previous editions of this standard, thread sizes 2,4 and 2,7 were included. In the March 1975 edition of this standard, these sizes were excluded from use in new designs. Because of the cont [...]

ASME

ASME B18.2.3.4M

1999

English

METRIC HEX FLANGE SCREWS

1.1 This standard covers the complete dimensional and general data for metric series hex flange screws recognized as American National Standard. 1.2 The inclusion of dimensional data in this st [...]

NASM

NASM 16555

1999

English

PIN, STRAIGHT, HEADLESS (DOWEL) (.0002 OVER NOMINAL SIZE)

CARBON OR ALLOY STEEL PINS SHALL HAVE A CORE HARDNESS OF 47-58 HRC, AND A CASE HARDNESS OF 60 HRC MINIMUM. THE CORE HARDNESS OF THE PINS SHALL NOT IN ANY INSTANCE EXCEED THE CASE HARDNESS. MINI [...]

ASTM

ASTM F880M

1997

English

Standard Specification for Stainless Steel Socket Set Screws [Metric]

1.1 This specification covers the requirements for austenitic grade stainless steel socket set screws (SS5), sizes M 1.6 through M 24, having Property Classes A 1-50 and A 1-70.

DIN

DIN 7337

1991

English

Break mandrel blind rivets

This standard specifies dimensions of, and requirements regarding material, design, strength and finish, as well as the relevant methods of test for, blind rivets of the self -plugging type. Su [...]

ISO

ISO 12683

2004

English

Mechanically deposited coatings of zinc — Specification and test methods

This document specifies the requirements for coatings of zinc that have been mechanically deposited on to fabricated metal articles to protect them from corrosion. It also describes the related [...]