DIN 798

Special Foundation Nuts for Special Foundation Bolts according to DIN 797

English 1972
0.000
DIN
Detailed Information

Strength category or material: 5 according to DIN 267 Sheet 4
Other strength categories or materials by spociel agreement.

Download File
(Log in to download spec.)

Check out other specifications

IFI
IFI-113
2007
English

STEEL SELF-DRILLING TAPPING SCREWS

1.1 Scope. This inch series standard covers requirements for steel, self-drilling, tapping screws suitable for use in general engineering applications. The objective of this standard is to ensure that self-drilling tapping screws, by meeting the mechanical and performance requirements specified,...
ISO
ISO 7378
1983
English

Fasteners – Bolts, screws and studs – Split pin holes and wire holes

This International Standard lays down the dimensions and position of split pin holes and wire holes for bolts, screws and studs, recommended for use unless otherwise specified in the appropriate product standard.
DIN
DIN 916
1980
English

Hexagon socket set screws with cup point – ISO 4029 modified

ISO 4029 specifies product grade A hexagon socket set screws with cup points with metric dimension and thread diameters from 1,6 up to and including 24 mm.
ANSI ASME
ANSI/ASME B18.7.1M
1992
English

METRIC GENERAL PURPOSE SEMI-TUBULAR RIVETS

1.1.1 This standard covers the general and dimensional data for oval head semi-tubular rivets for use in general purpose applications. The products described are suitable for joining metallic and nonmetallic materials or combinations thereof. Although these products are suitable for general purpo...
DIN
DIN 7339
1993
English

One-piece tubular rivets drawn from strip

This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal one-piece tubular rivets drawn from strip.
DIN EN
DIN EN 28739
1992
English

Full-length parallel grooved pins, with pilot (ISO 8739 : 1986) English version of DIN EN 28 739

This International Standard specifies the characteristics of full-length parallel grooved pins with pilot which have three equally spaced grooves impressed longitudinally on their exterior surface and a pilot to facilitate insertion, with metric dimensions and nominal diameter, d1, from 1,5 to 25...