Abstract of ASTM A563
CARBON AND ALLOY STEEL NUTS
English
2000
0.000
Detailed Information
This specification covers chemical and mechanical requirements for eight grades of carbon and alloy steel nuts for general structural and mechanical uses on bolts. studs. and other externally threaded parts.
Download File
(Log in to download spec.)
Check out other specifications
2000
English
CARBON AND ALLOY STEEL NUTS
This specification covers chemical and mechanical requirements for eight grades of carbon and alloy steel nuts for general structural and mechanical uses on bolts. studs. and other externally threaded parts.
1970
English
Spring Lock Washers Barbed or Plain with Rectangular Cross-section
The surface of the spring lock washers must be smooth and free from scale and burr. The spring lock washers must be coiled without kinks and their outer edges must be sharp or at the most lightly rounded. The spring lock washers are to be supplied lightly greased. Subject to agreement, they may ...
1989
English
High-strength hexagon head bolts with large widths across flats for structural steel bolting
High-strength hexagon head bolts are intended for use in GV and SL structural steel bolting in accordance with DIN 18800 Part 1, together with DIN 6915 hexagon nuts and DIN 6916, DIN 6917 or DIN 6918 washers.
1993
English
Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results
This International Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners, as well as recommendations for the evaluation of the results. Unless otherwise agreed, the tests are of the fluctuating tension type and are carried out at room temperature, the ...
1995
English
Studs with a length of engagement equal to about 2 d
This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in aluminium alloys. As specified in DIN 267-2, the stud end thread shall be produced to tolerance Sk6 as in DIN 13-51, unless the stud is designated Fo ('without interference-fit thread') or Sn4.