Check out other specifications
1993
English
Standard Specification for High-Strength Nonheaded Steel Bolts and Studs
1.1 This specification covers the chemical and mechanical requirements for quenched and tempered steel nonheaded bolts and studs with enhanced Charpy V-notch impact properties for anchorage and other purposes. The material shall be alloy steel as described in Table 1 and is limited to 5/8 to 3 in...
2009
English
Standard Practice for Operating Salt Spray (Fog) Apparatus
1.1 This practice covers the apparatus, procedure, and conditions required to create and maintain the salt spray (fog) test environment. Suitable apparatus which may be used is described in Appendix X1. 1.2 This practice does not prescribe the type of test specimen or exposure periods to be used ...
1986
English
Masonry and foundation bolts
This standard specifies the characteristics of M 8 to M 72 X 6 masonry and foundation bolts. They are designed for use in masonry, concrete foundations and the like. The shape of the shank is optional; compliance is only required in the case of the maximum dimensions specified (space requirement ...
1992
English
Hexagon nuts, style 2, with metric fine pitch thread – Product grades A and B (ISO 8674 :1988) English version of DIN EN 28 674
This International Standard gives specifications for hexagon nuts, style 2, with metric fine pitch thread, with nominal thread diameters d from 8 mm up to and including 36 mm, with product grade A for sizes d up to and including 16 mm and product grade B for sizes d over 16 mm.